Tag Archives: quality air compressor

China Good quality in-Car Air Compressor for Car & Commercial Vehicle 12V/120W/150psi,Digital Tyre Inflator Portable Air Compressor,Air Inflator Pump W/ Backlit LCD Auto Shut off with Great quality

Product Description

Product Description

 CACCES In-Car Air Compressor for Cars & Commercial Vehicles & Bicycles & Balls & Air Mattress Inflation FAST 12V/120W/150psi, Digital Tyre Inflator Portable Air Compressor, Air Inflator Pump with Backlit LCD Auto Shut Off Emergency LED Flashlight

Factory Original Supply E012MAP

1, Digital LED TOUCH SCREEN, 12V 150PSI Automatic inflation, Easy ONE-HAND Operation

2, CACCES Original Supply, BEST NEW SELLER

3, FAST INFLATION 150 PSI, 3*NOZZLE for cars, motorcycles, bikes, balls etc ALL FIT.

4, With bright LED light, CONVENIENT in night time.

About this item

(STRONG POWER & FAST INFLATING SPEED) The maximum inflatable pressure is 150 PSI. The tyre inflator can inflate a normal medium-sized car tire from 0 to 35 CHINAMFG in 3-5 minutes. Just press the switch and the tire inflator compressor will do all the work for you.

 

(EMERGENCY LED light & DIGITAL DISPLAY) CHINAMFG Tyre Pump is equipped with long-lasting and bright LED lights. You can easily read the tire pressure at night or under low light conditions. Digital display help you to calculate the required values PSI, KPA, BAR, KG/CM².

 

(AUTO SHUT OFF&TIRE PRESSURE CHECKING) Once the air compressor reaches the required pressure, it will automatically turn off. And you don’t have to worry about low tire pressure or over-inflating anymore. Directly plug it into the 12V DC socket (cigarette lighter). Then read and set the pressure through the digital reading, start pumping, and it will automatically shut down.

 

(Multifunctional) This portable tyre air pump comes with 3 nozzle adapters, not only car tires, it can also inflate bicycle tires, basketballs, footballs, inflatable toys, kayaks, etc. The compact and lightweight design takes up very little space and you can place it in the trunk. It is an important tool during your driving trip, and no need to worry about flat tires.

 

(EASY OPERATION) CACCES Digital Tyre Inflator can check the current tire pressure anytime, anywhere without going to a repair shop. Just start the car engine, plug the power plug into a cigarette lighter and connect the inflatable line to the tire.
 

Detailed Photos

 

 

Product Parameters

 

Product Name: In-Car Air Compressor for Cars & Commercial Vehicles & Bicycles & Balls & Air Mattress Inflation FAST 12V/120W/150psi, Digital Tyre Inflator Portable Air Compressor, Air Inflator Pump with Backlit LCD Auto Shut Off Emergency LED Flashlight
Part No.: E012MAP
Material: ABS + PP + Pure Copper
Product Dim.: 20(L)X16(W)X6(H) CM
Weight: 895G
Output Power: 120W
Work Voltage: 12V
Working current ≤ 10 A
Maximum pressure: 150PSI
Length of Power Cord: 300CM
Length of Air Horse: 19.7inch(50CM)
Air Flow: 35L
Sound Level: 80DB
Working Time: About 30 min.
Color: Yellow + Black, or any color for OEM
Packaging: Foam bag + Color Box + Carry Bag
Packing Qty/CTN: 18PCS
Master Carton Dim.: 53*25.5*46.5CM
Usage: Car, motorcycle, bike, ball, mattress, etc
Accessories Incl. 3 Nozzle Adaptors, 1* Fuse, 1* User Manual
Main Features: 1, Digital & Portable PREMIUM Reliable QUALITY
2, Multi Use for Indoor & Outdoor carry use
3, Easy Touching Screen
4, Emergency bright LIGHT
5, Automatic inflation shut off
6, EASY OPERATION
OEM MOQ: 1,000 pcs, private color box MOQ 5,000 pcs

 

FAQ

1Q: When can I get the quotation?
1A: CONFIDENCE AUTOMOTIVE usually quotes you within 6 hours after we get your inquiry.

2Q: Can I make my customize logo and packaging or private label?
2A: Yes, please contact CONFIDENCE AUTOMOTIVE for details in need for private logo.

3Q: Can you do design for my ideas or drawing?
3A: Yes, we have professional designers and own factories, supportive factories and packaging factories. All your idea is easy to realize with us, pls be rest assured!

4Q: Do you accept small orders?
4A: Yes, we accept trial order to test your market demand and help you grow to the NO.1 player same as we have done for all other partners in world markets.

5Q: May I get your samples to check the quality first?
5A: Yes, normally sample within 7 days and some samples are free.

6Q: What’s the shipping way?
6A: Re. samples order via FedEx, DHL, TNT express with the most effective and cheap way for you save cost and large quantity normally by sea, or rail.

7Q: I am a new hand, how to make business with you?
7A: We help you from the products, price, source, design, inspection, delivery, shipment, customs clearance, and door to door in need. Or any business way with us, we are open mind, welcome to discuss with us. CONFIDENCE AUTOMOTIVE IS ALWAYS YOUR BEST RELIABLE PARTNER IN CHINA.

WHY choose us?

1, Supply Chain: Import high quality raw material incl German BAYER, Japan Mitsubishi, Vietnam biggest rubber factory, etc ensure all production process is reliable and uniform.

2, ODM Design System: We are 1 main car spare parts manufacturer, brand that produce & develop O.E, O.E.M wiper blade, wiper arm, LED Headlight, car horn,  safety flashlight, outdoor flashlight, and packagings and working with world top brands in main markets with the capability to realize all your ideas from drafts, drawings, pictures, samples,… to the BEST OE quality without any doubt, TS16949 qualified.

3, Professional Service: Rich experience with top players in the markets over 10 years with a big service team support ONE-TO-ONE, FACE-TO-FACE business negotiation, communication, consulting, information sharing, and aftersales service help you save cost MAKE EASY business.

4, One-stop Products: Own independent and cooperative factories DIRECT supply! All car parts, accessories or related ones is welcomed openly and we commit to support our partners with ONE-STOP parts, accessories business in China help save purchasing cost, transportation cost, storage charge and time cost for ONE FAST CHEAP SHIPMENT timely!

5, Inspection System: All orders with 1 record system from 1st samples to finally confirmed products, photos, productions before shipment, customers can EASY TO TRACK EVERY ORDER and get 100% assured satisfied goods!

6, Business Growth: We have seasonal market info, new hot products advice, exhibition news to share freely for NEW BUSINESS, OR HELP SALES INCREASE regularly.

Please contact us directly below without hesitate, your inquiry will be answered promptly.
 

Application: Lorry, Truck, Car, Mini Car, Microbus
Certification: ISO, GS, CB, ETL, SASO, CE, RoHS
Color: Black+Yellow, Can Be Customized
Voltage: 12V
Power Supply: Ignitor
Power: 120W
Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

What is the impact of humidity on compressed air quality?

Humidity can have a significant impact on the quality of compressed air. Compressed air systems often draw in ambient air, which contains moisture in the form of water vapor. When this air is compressed, the moisture becomes concentrated, leading to potential issues in the compressed air. Here’s an overview of the impact of humidity on compressed air quality:

1. Corrosion:

High humidity in compressed air can contribute to corrosion within the compressed air system. The moisture in the air can react with metal surfaces, leading to rust and corrosion in pipes, tanks, valves, and other components. Corrosion not only weakens the structural integrity of the system but also introduces contaminants into the compressed air, compromising its quality and potentially damaging downstream equipment.

2. Contaminant Carryover:

Humidity in compressed air can cause carryover of contaminants. Water droplets formed due to condensation can carry particulates, oil, and other impurities present in the air. These contaminants can then be transported along with the compressed air, leading to fouling of filters, clogging of pipelines, and potential damage to pneumatic tools, machinery, and processes.

3. Decreased Efficiency of Pneumatic Systems:

Excessive moisture in compressed air can reduce the efficiency of pneumatic systems. Water droplets can obstruct or block the flow of air, leading to decreased performance of pneumatic tools and equipment. Moisture can also cause problems in control valves, actuators, and other pneumatic devices, affecting their responsiveness and accuracy.

4. Product Contamination:

In industries where compressed air comes into direct contact with products or processes, high humidity can result in product contamination. Moisture in compressed air can mix with sensitive products, leading to quality issues, spoilage, or even health hazards in industries such as food and beverage, pharmaceuticals, and electronics manufacturing.

5. Increased Maintenance Requirements:

Humidity in compressed air can increase the maintenance requirements of a compressed air system. Moisture can accumulate in filters, separators, and other air treatment components, necessitating frequent replacement or cleaning. Excessive moisture can also lead to the growth of bacteria, fungus, and mold within the system, requiring additional cleaning and maintenance efforts.

6. Adverse Effects on Instrumentation:

Humidity can adversely affect instrumentation and control systems that rely on compressed air. Moisture can disrupt the accuracy and reliability of pressure sensors, flow meters, and other pneumatic instruments, leading to incorrect measurements and control signals.

To mitigate the impact of humidity on compressed air quality, various air treatment equipment is employed, including air dryers, moisture separators, and filters. These devices help remove moisture from the compressed air, ensuring that the air supplied is dry and of high quality for the intended applications.

air compressor

What is the role of air compressors in manufacturing and industrial processes?

Air compressors play a crucial role in various manufacturing and industrial processes, providing a reliable source of compressed air that powers a wide range of equipment and tools. Here are some key roles of air compressors in manufacturing and industrial settings:

1. Pneumatic Tools and Equipment:

Air compressors power a wide range of pneumatic tools and equipment used in manufacturing processes. These tools include impact wrenches, air drills, sanders, grinders, nail guns, and spray guns. Compressed air provides the necessary force and energy for these tools, enabling efficient and precise operations.

2. Automation and Control Systems:

Compressed air is used in automation and control systems within manufacturing facilities. Pneumatic actuators and valves use compressed air to control the movement of machinery and components. These systems are widely used in assembly lines, packaging operations, and material handling processes.

3. Air Blowing and Cleaning:

Compressed air is employed for blowing and cleaning applications in manufacturing and industrial processes. Air blowguns and air nozzles are used to remove debris, dust, and contaminants from surfaces, machinery, and products. Compressed air is also used for drying, cooling, and purging operations.

4. Air Separation and Gas Generation:

Air compressors are used in air separation plants to generate industrial gases such as nitrogen, oxygen, and argon. These gases are essential for various industrial processes, including metal fabrication, chemical production, and food packaging.

5. HVAC Systems:

Compressed air is utilized in heating, ventilation, and air conditioning (HVAC) systems. It powers pneumatic actuators for damper control, pneumatic controls for pressure regulation, and pneumatic valves for flow control in HVAC applications.

6. Air Compression for Storage and Transport:

Compressed air is used for storage and transport purposes in manufacturing and industrial settings. It is often used to pressurize storage tanks or containers that hold gases or liquids. Compressed air also facilitates the transfer of materials through pipelines and pneumatic conveying systems.

7. Process Instrumentation:

Compressed air is utilized in process instrumentation and control systems. It powers pneumatic instruments such as pressure gauges, flow meters, and control valves. These instruments play a critical role in monitoring and regulating various parameters in industrial processes.

8. Material Handling and Pneumatic Conveying:

In manufacturing and industrial facilities, compressed air is used for material handling and pneumatic conveying systems. It enables the movement of bulk materials such as powders, granules, and pellets through pipelines, facilitating efficient and controlled material transfer.

Overall, air compressors are vital components in manufacturing and industrial processes, providing a versatile and efficient source of power for a wide range of applications. The specific role of air compressors may vary depending on the industry, process requirements, and operational needs.

air compressor

Can you explain the basics of air compressor terminology?

Understanding the basic terminology related to air compressors can help in better comprehension of their operation and discussions related to them. Here are some essential terms related to air compressors:

1. CFM (Cubic Feet per Minute): CFM is a unit of measurement that denotes the volumetric flow rate of compressed air. It indicates the amount of air a compressor can deliver within a minute and is a crucial factor in determining the compressor’s capacity.

2. PSI (Pounds per Square Inch): PSI is a unit of measurement used to quantify pressure. It represents the force exerted by the compressed air on a specific area. PSI is a vital specification for understanding the pressure capabilities of an air compressor and determining its suitability for various applications.

3. Duty Cycle: Duty cycle refers to the percentage of time an air compressor can operate in a given time period. It indicates the compressor’s ability to handle continuous operation without overheating or experiencing performance issues. For instance, a compressor with a 50% duty cycle can run for half the time in a given hour or cycle.

4. Horsepower (HP): Horsepower is a unit used to measure the power output of a compressor motor. It indicates the motor’s capacity to drive the compressor pump and is often used as a reference for comparing different compressor models.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air delivered by the compressor. It helps in stabilizing pressure fluctuations, allowing for a more consistent supply of compressed air during peak demand periods.

6. Single-Stage vs. Two-Stage: These terms refer to the number of compression stages in a reciprocating air compressor. In a single-stage compressor, air is compressed in a single stroke of the piston, while in a two-stage compressor, it undergoes initial compression in one stage and further compression in a second stage, resulting in higher pressures.

7. Oil-Free vs. Oil-Lubricated: These terms describe the lubrication method used in air compressors. Oil-free compressors have internal components that do not require oil lubrication, making them suitable for applications where oil contamination is a concern. Oil-lubricated compressors use oil for lubrication, enhancing durability and performance but requiring regular oil changes and maintenance.

8. Pressure Switch: A pressure switch is an electrical component that automatically starts and stops the compressor motor based on the pre-set pressure levels. It helps maintain the desired pressure range in the receiver tank and protects the compressor from over-pressurization.

9. Regulator: A regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications and ensures a consistent and safe supply of compressed air.

These are some of the fundamental terms associated with air compressors. Familiarizing yourself with these terms will aid in understanding and effectively communicating about air compressors and their functionality.

China Good quality in-Car Air Compressor for Car & Commercial Vehicle 12V/120W/150psi,Digital Tyre Inflator Portable Air Compressor,Air Inflator Pump W/ Backlit LCD Auto Shut off   with Great qualityChina Good quality in-Car Air Compressor for Car & Commercial Vehicle 12V/120W/150psi,Digital Tyre Inflator Portable Air Compressor,Air Inflator Pump W/ Backlit LCD Auto Shut off   with Great quality
editor by CX 2023-10-05

China Good quality CHINAMFG CHINAMFG A7 Truck CHINAMFG CHINAMFG Gearbox Parts Air Compressor 61800130043 arb air compressor

Product Description

Product Name WD615 air compressor for CHINAMFG CHINAMFG ETX6 ETX5 Series
Material Steel 
Function COMPRESS
Package Factory package 

1

Long standing reputation in this field

2

Specialization is standard and accurate meet your requirement

3

OEM quality standard guaranteed

4

Product upgrading and expansion of species

5

Good quality with competitive prices.

6

Flexible and convenient logistic service.

7

Excellent and high-quality control

8

Long lasting working life time.

9

Sufficient storage

Our advantage:

we can quickly supply your need spare parts according the part number,If you don’t know the part number, we can search and supply the right spare parts according the truck chassis code.

Who we are?
The most professional truck and spare parts manufacturer in China;
The leading truck and spare parts exporter in China;
The most comprehensive truck and spare parts solution provider in China;
The most worry-free and most satisfactory and reputable supplier for you in China.
We can never let you down if you choose us.

FAQ
Q1: Can you also supply Heavy Truck parts?
A1: Yes, We specialize in Sinotruk, Shacman, such as HOWO, CHINAMFG F3000,F2000, etc.

Q2: What’s the MOQ?
A2: Usually MOQ is according to different products,5 -10PCS/model for stock items.

Q3: What’s the delivery time?
A3: It takes 5-7 days if there is stock, and takes 1 month if there is no stock.

Q4: What’s the payment term?
A4: All by T/T, 30% in advance, 70% balance before shipping; option: L/C at sight.

Q5: What’s the packaging?
A5: Neutral packing or customer make packing

Our Services
– OEM Manufacturing is welcome: Product, Package…
– Customized design exclusive sealing products
– Specially designed for SINOTRUK, CHINAMFG series
– Installation guide
– Product maintenance training
– Free sample for your test
– We will reply your inquiry in 24 hours

 

After-sales Service: 1
Warranty: 1
Classification: Omit
Job Classification: Omit
Transmission Power: Omit
Transport Package: Wooden Carton, Neutral Box or Plastic Outside Pack
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

Can air compressors be used for gas compression and storage?

Yes, air compressors can be used for gas compression and storage. While air compressors are commonly used to compress and store air, they can also be utilized for compressing and storing other gases, depending on the specific application requirements. Here’s how air compressors can be used for gas compression and storage:

Gas Compression:

Air compressors can compress various gases by utilizing the same principles applied to compressing air. The compressor takes in the gas at a certain pressure, and through the compression process, it increases the pressure and reduces the volume of the gas. This compressed gas can then be used for different purposes, such as in industrial processes, gas pipelines, or storage systems.

Gas Storage:

Air compressors can also be used for gas storage by compressing the gas into storage vessels or tanks. The compressed gas is stored at high pressure within these vessels until it is needed for use. Gas storage is commonly employed in industries where a continuous and reliable supply of gas is required, such as in natural gas storage facilities or for storing compressed natural gas (CNG) used as a fuel for vehicles.

Gas Types:

While air compressors are primarily designed for compressing air, they can be adapted to handle various gases, including but not limited to:

  • Nitrogen
  • Oxygen
  • Hydrogen
  • Carbon dioxide
  • Natural gas
  • Refrigerant gases

It’s important to note that when using air compressors for gas compression and storage, certain considerations must be taken into account. These include compatibility of the compressor materials with the specific gas being compressed, ensuring proper sealing to prevent gas leaks, and adhering to safety regulations and guidelines for handling and storing compressed gases.

By leveraging the capabilities of air compressors, it is possible to compress and store gases efficiently, providing a reliable supply for various industrial, commercial, and residential applications.

air compressor

Can air compressors be integrated into automated systems?

Yes, air compressors can be integrated into automated systems, providing a reliable and versatile source of compressed air for various applications. Here’s a detailed explanation of how air compressors can be integrated into automated systems:

Pneumatic Automation:

Air compressors are commonly used in pneumatic automation systems, where compressed air is utilized to power and control automated machinery and equipment. Pneumatic systems rely on the controlled release of compressed air to generate linear or rotational motion, actuating valves, cylinders, and other pneumatic components. By integrating an air compressor into the system, a continuous supply of compressed air is available to power the automation process.

Control and Regulation:

In automated systems, air compressors are often connected to a control and regulation system to manage the compressed air supply. This system includes components such as pressure regulators, valves, and sensors to monitor and adjust the air pressure, flow, and distribution. The control system ensures that the air compressor operates within the desired parameters and provides the appropriate amount of compressed air to different parts of the automated system as needed.

Sequential Operations:

Integration of air compressors into automated systems enables sequential operations to be carried out efficiently. Compressed air can be used to control the timing and sequencing of different pneumatic components, ensuring that the automated system performs tasks in the desired order and with precise timing. This is particularly useful in manufacturing and assembly processes where precise coordination of pneumatic actuators is required.

Energy Efficiency:

Air compressors can contribute to energy-efficient automation systems. By incorporating energy-saving features such as Variable Speed Drive (VSD) technology, air compressors can adjust their power output according to the demand, reducing energy consumption during periods of low activity. Additionally, efficient control and regulation systems help optimize the use of compressed air, minimizing waste and improving overall energy efficiency.

Monitoring and Diagnostics:

Integration of air compressors into automated systems often includes monitoring and diagnostic capabilities. Sensors and monitoring devices can be installed to collect data on parameters such as air pressure, temperature, and system performance. This information can be used for real-time monitoring, preventive maintenance, and troubleshooting, ensuring the reliable operation of the automated system.

When integrating air compressors into automated systems, it is crucial to consider factors such as the specific requirements of the automation process, the desired air pressure and volume, and the compatibility of the compressor with the control and regulation system. Consulting with experts in automation and compressed air systems can help in designing an efficient and reliable integration.

In summary, air compressors can be seamlessly integrated into automated systems, providing the necessary compressed air to power and control pneumatic components, enabling sequential operations, and contributing to energy-efficient automation processes.

air compressor

What are the safety considerations when operating an air compressor?

Operating an air compressor requires careful attention to safety to prevent accidents, injuries, and equipment damage. Here are some important safety considerations to keep in mind:

1. Read the Manual: Before operating an air compressor, thoroughly read and understand the manufacturer’s instruction manual. Familiarize yourself with the specific safety guidelines, recommended operating procedures, and any specific precautions or warnings provided by the manufacturer.

2. Proper Ventilation: Ensure that the area where the air compressor is operated has adequate ventilation. Compressed air can produce high levels of heat and exhaust gases. Good ventilation helps dissipate heat, prevent the buildup of fumes, and maintain a safe working environment.

3. Personal Protective Equipment (PPE): Always wear appropriate personal protective equipment, including safety glasses or goggles, hearing protection, and non-slip footwear. Depending on the task, additional PPE such as gloves, a dust mask, or a face shield may be necessary to protect against specific hazards.

4. Pressure Relief: Air compressors should be equipped with pressure relief valves or devices to prevent overpressurization. Ensure that these safety features are in place and functioning correctly. Regularly inspect and test the pressure relief mechanism to ensure its effectiveness.

5. Secure Connections: Use proper fittings, hoses, and couplings to ensure secure connections between the air compressor, air tools, and accessories. Inspect all connections before operation to avoid leaks or sudden hose disconnections, which can cause injuries or damage.

6. Inspect and Maintain: Regularly inspect the air compressor for any signs of damage, wear, or leaks. Ensure that all components, including hoses, fittings, and safety devices, are in good working condition. Follow the manufacturer’s recommended maintenance schedule to keep the compressor in optimal shape.

7. Electrical Safety: If the air compressor is electric-powered, take appropriate electrical safety precautions. Use grounded outlets and avoid using extension cords unless approved for the compressor’s power requirements. Protect electrical connections from moisture and avoid operating the compressor in wet or damp environments.

8. Safe Start-Up and Shut-Down: Properly start and shut down the air compressor following the manufacturer’s instructions. Ensure that all air valves are closed before starting the compressor and release all pressure before performing maintenance or repairs.

9. Training and Competence: Ensure that operators are adequately trained and competent in using the air compressor and associated tools. Provide training on safe operating procedures, hazard identification, and emergency response protocols.

10. Emergency Preparedness: Have a clear understanding of emergency procedures and how to respond to potential accidents or malfunctions. Know the location of emergency shut-off valves, fire extinguishers, and first aid kits.

By adhering to these safety considerations and implementing proper safety practices, the risk of accidents and injuries associated with operating an air compressor can be significantly reduced. Prioritizing safety promotes a secure and productive working environment.

China Good quality CHINAMFG CHINAMFG A7 Truck CHINAMFG CHINAMFG Gearbox Parts Air Compressor 61800130043   arb air compressorChina Good quality CHINAMFG CHINAMFG A7 Truck CHINAMFG CHINAMFG Gearbox Parts Air Compressor 61800130043   arb air compressor
editor by CX 2023-10-03

China OEM Tr-3065 4HP 3cylinder Air Compressor Head Air Pump with High Quality with high quality

Product Description

Product Description

 1. easy to delivery with suitable package          2. cheap prices           3. quick delivery 

4.Place of Origin: HangZhou, China

5.Model Number: TR-2065
 

Workshop

 Packing with wooden cases

Our Services

We offer 1 year warranty. During warranty period, any problem caused by air compressor quality please feedback to us as soon as possible, we will offer technical help and guidance with free spare parts for maintenance

 

FAQ
                        
1. Are you a factory or a trading company?
A: We are factory, and We have the right to export any country independently

2.What is the specific address of your company?
A: No.23, HangZhou Road, CHINAMFG Industrial Park, HangZhou, ZheJiang , China

3. Do your company accept ODM & OEM?
A: Yes, of course. We accept full ODM & OEM.

4. What about the voltage of products? Can they be customized?
A: Yes, of course. The voltage can be customized according to your requirement.

5.Do your company offer spare parts of the machines?
A: Yes, of course, high quality spare parts are available in our factory.

6.What are your payment terms?
A: 30% T/T in advance, 70% T/T before delivery.

7. What payment ways do you accept?
A: T/T, Western Union

8. How long will you take to arrange the goods?
A: For normal voltages,we can delivery the goods within 7-15 days. For other electricity or other customized machines, we will delivery within 25-30 days.

 

After-sales Service: Online Support or Free Accessories Provided
Warranty: 1 Year
Flow: Cross Flow
Drying Medium: Air
Structure: Open
Operation Pressure: Vacuum
Customization:
Available

|

air compressor

What role do air dryers play in compressed air systems?

Air dryers play a crucial role in compressed air systems by removing moisture and contaminants from the compressed air. Compressed air, when generated, contains water vapor from the ambient air, which can condense and cause issues in the system and end-use applications. Here’s an overview of the role air dryers play in compressed air systems:

1. Moisture Removal:

Air dryers are primarily responsible for removing moisture from the compressed air. Moisture in compressed air can lead to problems such as corrosion in the system, damage to pneumatic tools and equipment, and compromised product quality in manufacturing processes. Air dryers utilize various techniques, such as refrigeration, adsorption, or membrane separation, to reduce the dew point of the compressed air and eliminate moisture.

2. Contaminant Removal:

In addition to moisture, compressed air can also contain contaminants like oil, dirt, and particles. Air dryers help in removing these contaminants to ensure clean and high-quality compressed air. Depending on the type of air dryer, additional filtration mechanisms may be incorporated to enhance the removal of oil, particulates, and other impurities from the compressed air stream.

3. Protection of Equipment and Processes:

By removing moisture and contaminants, air dryers help protect the downstream equipment and processes that rely on compressed air. Moisture and contaminants can negatively impact the performance, reliability, and lifespan of pneumatic tools, machinery, and instrumentation. Air dryers ensure that the compressed air supplied to these components is clean, dry, and free from harmful substances, minimizing the risk of damage and operational issues.

4. Improved Productivity and Efficiency:

Utilizing air dryers in compressed air systems can lead to improved productivity and efficiency. Dry and clean compressed air reduces the likelihood of equipment failures, downtime, and maintenance requirements. It also prevents issues such as clogging of air lines, malfunctioning of pneumatic components, and inconsistent performance of processes. By maintaining the quality of compressed air, air dryers contribute to uninterrupted operations, optimized productivity, and cost savings.

5. Compliance with Standards and Specifications:

Many industries and applications have specific standards and specifications for the quality of compressed air. Air dryers play a vital role in meeting these requirements by ensuring that the compressed air meets the desired quality standards. This is particularly important in industries such as food and beverage, pharmaceuticals, electronics, and automotive, where clean and dry compressed air is essential for product integrity, safety, and regulatory compliance.

By incorporating air dryers into compressed air systems, users can effectively control moisture and contaminants, protect equipment and processes, enhance productivity, and meet the necessary quality standards for their specific applications.

air compressor

How do you choose the right air compressor for woodworking?

Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:

1. Required Air Volume (CFM):

Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.

2. Tank Size:

Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.

3. Maximum Pressure (PSI):

Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.

4. Noise Level:

Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.

5. Portability:

Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.

6. Power Source:

Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.

7. Quality and Reliability:

Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.

8. Budget:

Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.

By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.

air compressor

Can air compressors be used for automotive applications?

Yes, air compressors can be used for various automotive applications and are commonly found in automotive repair shops, garages, and even in some vehicles. Here are some automotive applications where air compressors are frequently utilized:

1. Tire Inflation: Air compressors are commonly used to inflate tires in automotive applications. They provide a convenient and efficient way to inflate tires to the recommended pressure, ensuring optimal tire performance, fuel efficiency, and safety.

2. Air Tools: Air compressors power a wide range of pneumatic tools used in automotive repair and maintenance. These tools include impact wrenches, ratchet wrenches, air hammers, pneumatic drills, and sanders. Air-powered tools are favored for their high torque and power-to-weight ratio, making them suitable for heavy-duty automotive tasks.

3. Spray Painting: Air compressors are commonly used in automotive painting applications. They power airbrushes and spray guns that are used to apply paint, primer, and clear coats. Air compressors provide the necessary air pressure to atomize the paint and deliver a smooth and even finish.

4. Brake System Maintenance: Air compressors play a crucial role in maintaining and diagnosing automotive brake systems. They are used to pressurize the brake lines, allowing for proper bleeding of the system and detection of leaks or faults.

5. Suspension Systems: Some automotive suspension systems, such as air suspensions, rely on air compressors to maintain the desired air pressure in the suspension components. The compressor inflates or deflates the suspension as needed to provide a comfortable ride and optimal handling.

6. Cleaning and Dusting: Air compressors are used for cleaning automotive parts, blowing away dust and debris, and drying surfaces. They provide a high-pressure stream of air that effectively cleans hard-to-reach areas.

7. Air Conditioning Systems: Air compressors are a key component in automotive air conditioning systems. They compress and circulate refrigerant, allowing the system to cool and dehumidify the air inside the vehicle.

When using air compressors for automotive applications, it’s important to consider the specific requirements of the task at hand. Ensure that the air compressor has the necessary pressure and capacity to meet the demands of the application. Additionally, use appropriate air hoses, fittings, and tools that are compatible with the compressor’s output.

Overall, air compressors are versatile and valuable tools in the automotive industry, providing efficient power sources for a wide range of applications, from tire inflation to powering pneumatic tools and supporting various automotive systems.

China OEM Tr-3065 4HP 3cylinder Air Compressor Head Air Pump with High Quality   with high qualityChina OEM Tr-3065 4HP 3cylinder Air Compressor Head Air Pump with High Quality   with high quality
editor by CX 2023-10-02

China Best Sales 30 Bar Compressed Air Booster Compressor High Pressure Water Cooled Compressor with Good quality

Product Description

Product name

Middle Pressure Air Compressor

Pressure

30/40 bar

Voltage

380V/50HZ, 220V/60HZ, 400V/50HZ, 415V/50HZ or Customer′s Requirements

Color

Customized

Feature:
Quality products.
Low discharge temperature with aluminum
Heat exchanger.
Big vloume tank.
Air cooling/ water cooling option

1. The motor uses copper core coils to make the compressor achieve high power, high efficiency and high performance.

2. The friction coefficient of the piston ring is small and can be self-lubricated.

3. The cylinder liner adopts a surface hardening process, which greatly reduces the thickness and speeds up the heat transfer; increases the density of the surface and reduces the friction coefficient, thereby increasing the service life.

4. The intake and exhaust valve adopts reasonable noise reduction design, which greatly increases the volumetric efficiency and low noise.

5. The design of the whole machine is considerate and considerate, flexible in movement, simple in operation and convenient in maintenance.

Medium Pressure Air Compressor Product Parameters
Category Model Pressure
(bar)
Displacement
(m³/min)
Motor Power
(kw)
Air cooling
piston air compressor        
( single / unit )
MPP-AP-1.0 30/40 1 11
MPP-AP-1.2 1.2 15
MPP-AP-1.6 1.6 18.5
MPP-AP-2.0 2 22
MPP-AP-2.5 2.5 25
2-MPP-AP-1.0 2 2*11
2-MPP-AP-1.2 2.4 2*15
2-MPP-AP-1.6 3.2 2*18.5
2-MPP-AP-2.0 4 2*22
2-MPP-AP-2.5 5 2*25
Air cooling
booster air compressor
MPP-AB-4.0 4 18.5
MPP-AB-6.0 6 25
MPP-AB-8.0 8 30
Water cooling
piston air compressor
MPP-WP-1.3 1.3 15
MPP-WP-1.6 1.6 18.5
MPP-WP-2.0 2 22
MPP-WP-2.5 2.5 25
MPP-WP-3.0 3 30
Water cooling
booster air compressor
MPP-WB-4.0 4 18.5
MPP-WB-6.0 6 25
MPP-WB-8.0 8 30
Water cooling oil-free booster air compressor
( single / integrated )
MPP-OB-4.0 4 18.5
MPP-OB-6.0 6 25
MPP-OB-8.0 8 30
         
         
         
         
Combined Medium Pressure Air Compressor Product Parameters
Category Model Pressure
(bar)
Displacement
(m³/min)
Motor Power
(kw)
Laser cutting supporting
air compressor
MPP-LC-1.2 30/40 1.2 15
MPP-LC-1.6 1.6 18.5
MPP-LC-2.0 2.0 22
MPP-LC-2.5 2.5 25

ZheJiang CHINAMFG Gas Compressor Manufacturing Co.,Ltd. founded in 2005, is a leading high technology of machine and equipment manufacturer integrating the design, R&D, production, sales and service for air compressors & Mining Equipment. Adopting advanced technology, design concept and quality control, and we are able to provide customized products to meet customers’ OEM needs.
Our company has more than 520 employees, including 86 senior technicians and professional engineers. Our technical team provides our customers with professional air system solutions. With the total 15000 square meters of the facility, 4 modern advanced production lines are built up to ensure production capacity to meet customer requirements.
Our company has been awarded the honorary title of “ZheJiang high-tech enterprise” and our products enjoy high honors in the industry. Our company has the ISO9001 certification and was awarded the qualification certificate of equipment through military contracts in 2018.
We offer the following products and services:
1. Screw air compressor
    1.1 Oil-free screw air compressor
    1.2 Oil-injected air compressor
2. Reciprocating piston air compressor
    2.1 Piston air compressor
    2.2 Oil-free piston air compressor
    2.3 Piston medium & high-pressure air compressor
3.Portable air compressor & Mining Equipment
    3.1 Diesel or Electric portable screw air compressor
    3.2 Air Pick, Rock Drill, DTH Drilling Rig, Crawler Drilling Rig
4. Air compressor accessories
    4.1 CHINAMFG or Adsorption compressed air drier
    4.2 Compressed air filter or tank
4.3 Lubrication oil
We have a complete system of after-sales service and quality assurance. The company’s material purchase, inspection, manufacturing, installation, and testing are strictly in accordance with the ISO procedures. which will ensure each compressor has reliable quality and has a complete record to trace, if needed.
Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.

Q: How can we start order with your factory?
A: First, leave us an inquiry and advise which item you’re interested, and then we will contact you in 24 hours. You’re so kind if provide all detailed information, will better for us to know exactly what you need.

Q: What are your MOQ?
A: Different products have different MOQ, most is 1 set.

Q: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages.

Q: How about your delivery time?
A: Generally, it will take 90 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q: Do you a trade company or real factory?
A: We are 100% factory; we located in ZheJiang city, China.

After-sales Service: Online Support
Warranty: 1 Year
Lubrication Style: Lubricated
Cooling System: Air Cooling
Structure Type: Open Type
Pressure: 30/40 Bar
Samples:
US$ 1800/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

How does variable speed drive technology improve air compressor efficiency?

Variable Speed Drive (VSD) technology improves air compressor efficiency by allowing the compressor to adjust its motor speed to match the compressed air demand. This technology offers several benefits that contribute to energy savings and enhanced overall system efficiency. Here’s how VSD technology improves air compressor efficiency:

1. Matching Air Demand:

Air compressors equipped with VSD technology can vary the motor speed to precisely match the required compressed air output. Traditional fixed-speed compressors operate at a constant speed regardless of the actual demand, leading to energy wastage during periods of lower air demand. VSD compressors, on the other hand, ramp up or down the motor speed to deliver the necessary amount of compressed air, ensuring optimal energy utilization.

2. Reduced Unloaded Running Time:

Fixed-speed compressors often run unloaded during periods of low demand, where they continue to consume energy without producing compressed air. VSD technology eliminates or significantly reduces this unloaded running time by adjusting the motor speed to closely follow the air demand. As a result, VSD compressors minimize energy wastage during idle periods, leading to improved efficiency.

3. Soft Starting:

Traditional fixed-speed compressors experience high inrush currents during startup, which can strain the electrical system and cause voltage dips. VSD compressors utilize soft starting capabilities, gradually ramping up the motor speed instead of instantly reaching full speed. This soft starting feature reduces mechanical and electrical stress, ensuring a smooth and controlled startup, and minimizing energy spikes.

4. Energy Savings at Partial Load:

In many applications, compressed air demand varies throughout the day or during different production cycles. VSD compressors excel in such scenarios by operating at lower speeds during periods of lower demand. Since power consumption is proportional to motor speed, running the compressor at reduced speeds significantly reduces energy consumption compared to fixed-speed compressors that operate at a constant speed regardless of the demand.

5. Elimination of On/Off Cycling:

Fixed-speed compressors often use on/off cycling to adjust the compressed air output. This cycling can result in frequent starts and stops, which consume more energy and cause mechanical wear. VSD compressors eliminate the need for on/off cycling by continuously adjusting the motor speed to meet the demand. By operating at a consistent speed within the required range, VSD compressors minimize energy losses associated with frequent cycling.

6. Enhanced System Control:

VSD compressors offer advanced control capabilities, allowing for precise monitoring and adjustment of the compressed air system. These systems can integrate with sensors and control algorithms to maintain optimal system pressure, minimize pressure fluctuations, and prevent excessive energy consumption. The ability to fine-tune the compressor’s output based on real-time demand contributes to improved overall system efficiency.

By utilizing variable speed drive technology, air compressors can achieve significant energy savings, reduce operational costs, and enhance their environmental sustainability by minimizing energy wastage and optimizing efficiency.

air compressor

What safety precautions should be taken when working with compressed air?

Working with compressed air requires adherence to certain safety precautions to prevent accidents and ensure the well-being of individuals involved. Here are some important safety measures to consider:

1. Personal Protective Equipment (PPE):

Wear appropriate PPE, including safety goggles or a face shield to protect eyes from flying debris or particles, hearing protection to reduce noise exposure, and gloves to safeguard hands from potential hazards.

2. Compressed Air Storage:

Avoid storing compressed air in containers that are not designed for this purpose, such as soda bottles or makeshift containers. Use approved and properly labeled air storage tanks or cylinders that can handle the pressure and are regularly inspected and maintained.

3. Pressure Regulation:

Ensure that the air pressure is regulated to a safe level suitable for the equipment and tools being used. High-pressure air streams can cause serious injuries, so it is important to follow the manufacturer’s recommendations and never exceed the maximum allowable pressure.

4. Air Hose Inspection:

Regularly inspect air hoses for signs of damage, such as cuts, abrasions, or leaks. Replace damaged hoses immediately to prevent potential accidents or loss of pressure.

5. Air Blowguns:

Exercise caution when using air blowguns. Never direct compressed air towards yourself or others, as it can cause eye injuries, hearing damage, or dislodge particles that may be harmful if inhaled. Always point blowguns away from people or any sensitive equipment or materials.

6. Air Tool Safety:

Follow proper operating procedures for pneumatic tools. Ensure that tools are in good working condition, and inspect them before each use. Use the appropriate accessories, such as safety guards or shields, to prevent accidental contact with moving parts.

7. Air Compressor Maintenance:

Maintain air compressors according to the manufacturer’s guidelines. Regularly check for leaks, clean or replace filters, and drain moisture from the system. Proper maintenance ensures the safe and efficient operation of the compressor.

8. Training and Education:

Provide adequate training and education to individuals working with compressed air. Ensure they understand the potential hazards, safe operating procedures, and emergency protocols. Encourage open communication regarding safety concerns and implement a culture of safety in the workplace.

9. Lockout/Tagout:

When performing maintenance or repairs on compressed air systems, follow lockout/tagout procedures to isolate the equipment from energy sources and prevent accidental startup. This ensures the safety of the individuals working on the system.

10. Proper Ventilation:

Ensure proper ventilation in enclosed areas where compressed air is used. Compressed air can displace oxygen, leading to a potential risk of asphyxiation. Adequate ventilation helps maintain a safe breathing environment.

By adhering to these safety precautions, individuals can minimize the risks associated with working with compressed air and create a safer work environment.

air compressor

What is the difference between a piston and rotary screw compressor?

Piston compressors and rotary screw compressors are two common types of air compressors with distinct differences in their design and operation. Here’s a detailed explanation of the differences between these two compressor types:

1. Operating Principle:

  • Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
  • Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.

2. Compression Method:

  • Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
  • Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.

3. Efficiency:

  • Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
  • Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.

4. Noise Level:

  • Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
  • Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.

5. Maintenance:

  • Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
  • Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.

6. Size and Portability:

  • Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
  • Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.

These are some of the key differences between piston compressors and rotary screw compressors. The choice between the two depends on factors such as required flow rate, pressure, duty cycle, efficiency, noise level, maintenance needs, and specific application requirements.

China Best Sales 30 Bar Compressed Air Booster Compressor High Pressure Water Cooled Compressor   with Good qualityChina Best Sales 30 Bar Compressed Air Booster Compressor High Pressure Water Cooled Compressor   with Good quality
editor by CX 2023-10-02

China Best Sales Tankpressure Vessel Gas Receiver Tank Air Receiver Tank Air Compressor China Manufacturer with Good quality

Product Description

Product Description

The negative pressure tank, due to the function of the vacuum compensator, maintains a positive pressure inside the tank under any working state, which prevents the water pump from directly pumping water from the tap water pipe network, protects the water pump, and avoids water shortage for users.

Design Standard ASME/PED Diameter 500-3000mm
Design pressure As code Vessel type Horizontal/vertical
TPI YES/as required Raw material SA516-70 or required
Application Water treatment/petrochemical Packing Transport saddle

 

Detailed Photos

Certifications

 

Packaging & Shipping

 

Company Profile

DFC has a wealth of pressure vessel manufacturing technology and production experience. It can produce
pressure vessels with raw material stainless steel, carbon steel, titanium, copper, nickel-based alloy, composite plate. Also can process and manufacture separated pressure vessel, and undertake a complete
turnkey project. The main products including heat exchangers, towers, large storage tanks, storage vessels, separators, reaction vessels, and vessels such as stirred vessels, fermentation , crystallization and other containers.The pressure vessel equipment has a maximum weight of 350 tons, a maximum length of 59 meters, a maximum volume of 280 cubic meters, and a maximum shell wall thickness of 120 mm. The
annual production capacity is about 15,000 tons. Products are used in chemical fertilizer, petroleum, chemical, coal chemical, metallurgy, environmental protection, water treatment, paper, light industry, pharmaceutical, biological, beer, food and other industrial fields, and the products have been exported to the United States, Russia, Canada, Peru, Belgium, Costa Rica, Saudi Arabia, Switzerland, Sweden, South
Korea, Japan, Malaysia, Indonesia, Italy, Sudan, Turkmenistan, Niger, Chad, Iran, Iraq, Russia, Lithuania, and get good reputation from domestic market and foreign customers.

 

Our Advantages

DFC has excellent production equipment and complete testing methods. It has welding equipment such as
CNC cutting machine, automatic submerged arc welding machine, tube-to-tube sheet automatic argon arc
welding machine, and other devices such as thick plate narrow gap welder, pole welding machine, heat
treatment equipment, sandblasting device, rust removal equipment; testing equipment such as ray, ultrasonic, magnetic powder, penetration testing; chemical element analysis equipment as pressure testing, material mechanical testing to ensure that the products use the advanced manufacturing technology and perfect testing methods. 

 

 

Contact us

For more information about surge vessel, please contact:

 
Grace Liu
Sales Assistant

 
DFC Pressure Vessel Manufacture Co., Ltd.

After-sales Service: Whole Life Service
Warranty: 18 Months
Type: Horizontal / Vertical
Paint: Jotun
Design Standard: ASME
Raw Material: SA-36
Customization:
Available

|

air compressor

What is the role of air compressors in power generation?

Air compressors play a significant role in power generation, supporting various operations and equipment within the industry. Here are some key roles of air compressors in power generation:

1. Combustion Air Supply:

Air compressors are used to supply compressed air for the combustion process in power generation. In fossil fuel power plants, such as coal-fired or natural gas power plants, compressed air is required to deliver a steady flow of air to the burners. The compressed air helps in the efficient combustion of fuel, enhancing the overall performance and energy output of the power plant.

2. Instrumentation and Control:

Air compressors are utilized for instrumentation and control systems in power generation facilities. Compressed air is used to operate pneumatic control valves, actuators, and other pneumatic devices that regulate the flow of steam, water, and gases within the power plant. The reliable and precise control provided by compressed air ensures efficient and safe operation of various processes and equipment.

3. Cooling and Ventilation:

In power generation, air compressors are involved in cooling and ventilation applications. Compressed air is used to drive air-operated cooling fans and blowers, providing adequate airflow for cooling critical components such as generators, transformers, and power electronics. The compressed air also assists in maintaining proper ventilation in control rooms, substations, and other enclosed spaces, helping to dissipate heat and ensure a comfortable working environment.

4. Cleaning and Maintenance:

Air compressors are employed for cleaning and maintenance tasks in power generation facilities. Compressed air is utilized to blow away dust, dirt, and debris from equipment, machinery, and electrical panels. It helps in maintaining the cleanliness and optimal performance of various components, reducing the risk of equipment failure and improving overall reliability.

5. Pneumatic Tools and Equipment:

In power generation plants, air compressors provide the necessary compressed air for operating pneumatic tools and equipment. These tools include impact wrenches, pneumatic drills, grinders, and sandblasting equipment, which are utilized for installation, maintenance, and repair tasks. The high-pressure air generated by compressors enables efficient and reliable operation of these tools, enhancing productivity and reducing manual effort.

6. Nitrogen Generation:

Sometimes, air compressors are used in power generation for nitrogen generation. Compressed air is passed through a nitrogen generator system, which separates nitrogen from other components of air, producing a high-purity nitrogen gas stream. Nitrogen is commonly used in power plant applications, such as purging systems, blanketing in transformers, and generator cooling, due to its inert properties and low moisture content.

7. Start-up and Emergency Systems:

Air compressors are an integral part of start-up and emergency systems in power generation. Compressed air is utilized to power pneumatic starters for gas turbines, providing the initial rotation needed to start the turbine. In emergency situations, compressed air is also used to actuate emergency shutdown valves, safety systems, and fire suppression equipment, ensuring the safe operation and protection of the power plant.

Overall, air compressors contribute to the efficient and reliable operation of power generation facilities, supporting combustion processes, control systems, cooling, cleaning, and various other applications critical to the power generation industry.

air compressor

Can air compressors be used for medical and dental applications?

Yes, air compressors can be used for various medical and dental applications. Compressed air is a reliable and versatile utility in healthcare settings, providing power for numerous devices and procedures. Here are some common applications of air compressors in medical and dental fields:

1. Dental Tools:

Air compressors power a wide range of dental tools and equipment, such as dental handpieces, air syringes, air scalers, and air abrasion devices. These tools rely on compressed air to generate the necessary force and airflow for effective dental procedures.

2. Medical Devices:

Compressed air is used in various medical devices and equipment. For example, ventilators and anesthesia machines utilize compressed air to deliver oxygen and other gases to patients. Nebulizers, used for respiratory treatments, also rely on compressed air to convert liquid medications into a fine mist for inhalation.

3. Laboratory Applications:

Air compressors are used in medical and dental laboratories for various purposes. They power laboratory instruments, such as air-driven centrifuges and sample preparation equipment. Compressed air is also used for pneumatic controls and automation systems in lab equipment.

4. Surgical Tools:

In surgical settings, compressed air is employed to power specialized surgical tools. High-speed air-driven surgical drills, saws, and bone-cutting instruments are commonly used in orthopedic and maxillofacial procedures. Compressed air ensures precise control and efficiency during surgical interventions.

5. Sterilization and Autoclaves:

Compressed air is essential for operating sterilization equipment and autoclaves. Autoclaves use steam generated by compressed air to sterilize medical instruments, equipment, and supplies. The pressurized steam provides effective disinfection and ensures compliance with rigorous hygiene standards.

6. Dental Air Compressors:

Specialized dental air compressors are designed specifically for dental applications. These compressors have features such as moisture separators, filters, and noise reduction mechanisms to meet the specific requirements of dental practices.

7. Air Quality Standards:

In medical and dental applications, maintaining air quality is crucial. Compressed air used in healthcare settings must meet specific purity standards. This often requires the use of air treatment systems, such as filters, dryers, and condensate management, to ensure the removal of contaminants and moisture.

8. Compliance and Regulations:

Medical and dental facilities must comply with applicable regulations and guidelines regarding the use of compressed air. These regulations may include requirements for air quality, maintenance and testing procedures, and documentation of system performance.

It is important to note that medical and dental applications have specific requirements and standards. Therefore, it is essential to choose air compressors and associated equipment that meet the necessary specifications and comply with industry regulations.

air compressor

What maintenance is required for air compressors?

Maintaining air compressors is essential to ensure their optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, improves efficiency, and reduces the risk of accidents. Here are some key maintenance tasks for air compressors:

1. Regular Inspection: Perform visual inspections of the air compressor to identify any signs of wear, damage, or leaks. Inspect the compressor, hoses, fittings, and connections for any abnormalities. Pay attention to oil leaks, loose bolts, and worn-out components.

2. Oil Changes: If your air compressor has an oil lubrication system, regular oil changes are crucial. Follow the manufacturer’s recommendations for the frequency of oil changes and use the recommended oil type. Dirty or degraded oil can impact compressor performance and lead to premature wear.

3. Air Filter Cleaning or Replacement: Clean or replace the air filter regularly to ensure proper air intake and prevent contaminants from entering the compressor. Clogged or dirty filters can restrict airflow and reduce efficiency.

4. Drain Moisture: Air compressors produce moisture as a byproduct of the compression process. Accumulated moisture in the tank can lead to rust and corrosion. Drain the moisture regularly from the tank to prevent damage. Some compressors have automatic drains, while others require manual draining.

5. Belt Inspection and Adjustment: If your compressor has a belt-driven system, inspect the belts for signs of wear, cracks, or tension issues. Adjust or replace the belts as necessary to maintain proper tension and power transmission.

6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

7. Valve Maintenance: Check the safety valves, pressure relief valves, and other valves regularly to ensure they are functioning correctly. Test the valves periodically to verify their proper operation.

8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

10. Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s manual for specific maintenance instructions and recommended service intervals for your air compressor model. They provide valuable information on maintenance tasks, lubrication requirements, and safety precautions.

Regular maintenance is vital to keep your air compressor in optimal condition and extend its lifespan. It’s also important to note that maintenance requirements may vary depending on the type, size, and usage of the compressor. By following a comprehensive maintenance routine, you can ensure the reliable operation of your air compressor and maximize its efficiency and longevity.

China Best Sales Tankpressure Vessel Gas Receiver Tank Air Receiver Tank Air Compressor China Manufacturer   with Good qualityChina Best Sales Tankpressure Vessel Gas Receiver Tank Air Receiver Tank Air Compressor China Manufacturer   with Good quality
editor by CX 2023-10-01

China Best Sales CHINAMFG Truck Spare Parts Air Compressor Vg1560130080 with Good quality

Product Description

SINOTRUK CHINAMFG TRUCK Spare Parts Air Compressor VG156013

Classification: Variable Capacity
Job Classification: Rotary Type
Transmission Power: Dynamoelectric
Cooling Method: Water-cooled
Cylinder Arrangement Mode: Side-by-Side
Cylinder Stage: Double Stages
Customization:
Available

|

air compressor

How does variable speed drive technology improve air compressor efficiency?

Variable Speed Drive (VSD) technology improves air compressor efficiency by allowing the compressor to adjust its motor speed to match the compressed air demand. This technology offers several benefits that contribute to energy savings and enhanced overall system efficiency. Here’s how VSD technology improves air compressor efficiency:

1. Matching Air Demand:

Air compressors equipped with VSD technology can vary the motor speed to precisely match the required compressed air output. Traditional fixed-speed compressors operate at a constant speed regardless of the actual demand, leading to energy wastage during periods of lower air demand. VSD compressors, on the other hand, ramp up or down the motor speed to deliver the necessary amount of compressed air, ensuring optimal energy utilization.

2. Reduced Unloaded Running Time:

Fixed-speed compressors often run unloaded during periods of low demand, where they continue to consume energy without producing compressed air. VSD technology eliminates or significantly reduces this unloaded running time by adjusting the motor speed to closely follow the air demand. As a result, VSD compressors minimize energy wastage during idle periods, leading to improved efficiency.

3. Soft Starting:

Traditional fixed-speed compressors experience high inrush currents during startup, which can strain the electrical system and cause voltage dips. VSD compressors utilize soft starting capabilities, gradually ramping up the motor speed instead of instantly reaching full speed. This soft starting feature reduces mechanical and electrical stress, ensuring a smooth and controlled startup, and minimizing energy spikes.

4. Energy Savings at Partial Load:

In many applications, compressed air demand varies throughout the day or during different production cycles. VSD compressors excel in such scenarios by operating at lower speeds during periods of lower demand. Since power consumption is proportional to motor speed, running the compressor at reduced speeds significantly reduces energy consumption compared to fixed-speed compressors that operate at a constant speed regardless of the demand.

5. Elimination of On/Off Cycling:

Fixed-speed compressors often use on/off cycling to adjust the compressed air output. This cycling can result in frequent starts and stops, which consume more energy and cause mechanical wear. VSD compressors eliminate the need for on/off cycling by continuously adjusting the motor speed to meet the demand. By operating at a consistent speed within the required range, VSD compressors minimize energy losses associated with frequent cycling.

6. Enhanced System Control:

VSD compressors offer advanced control capabilities, allowing for precise monitoring and adjustment of the compressed air system. These systems can integrate with sensors and control algorithms to maintain optimal system pressure, minimize pressure fluctuations, and prevent excessive energy consumption. The ability to fine-tune the compressor’s output based on real-time demand contributes to improved overall system efficiency.

By utilizing variable speed drive technology, air compressors can achieve significant energy savings, reduce operational costs, and enhance their environmental sustainability by minimizing energy wastage and optimizing efficiency.

air compressor

How does the horsepower of an air compressor affect its capabilities?

The horsepower of an air compressor is a crucial factor that directly impacts its capabilities and performance. Here’s a closer look at how the horsepower rating affects an air compressor:

Power Output:

The horsepower rating of an air compressor indicates its power output or the rate at which it can perform work. Generally, a higher horsepower rating translates to a greater power output, allowing the air compressor to deliver more compressed air per unit of time. This increased power output enables the compressor to operate pneumatic tools and equipment that require higher air pressure or greater airflow.

Air Pressure:

The horsepower of an air compressor is directly related to the air pressure it can generate. Air compressors with higher horsepower ratings have the capacity to produce higher air pressures. This is particularly important when operating tools or machinery that require specific air pressure levels to function optimally. For example, heavy-duty pneumatic tools like jackhammers or impact wrenches may require higher air pressure to deliver the necessary force.

Air Volume:

In addition to air pressure, the horsepower of an air compressor also affects the air volume or airflow it can provide. Higher horsepower compressors can deliver greater volumes of compressed air, measured in cubic feet per minute (CFM). This increased airflow is beneficial when using pneumatic tools that require a continuous supply of compressed air, such as paint sprayers or sandblasters.

Duty Cycle:

The horsepower rating of an air compressor can also influence its duty cycle. The duty cycle refers to the amount of time an air compressor can operate continuously before it needs to rest and cool down. Higher horsepower compressors often have larger and more robust components, allowing them to handle heavier workloads and operate for longer periods without overheating. This is particularly important in demanding applications where continuous and uninterrupted operation is required.

Size and Portability:

It’s worth noting that the horsepower rating can also affect the physical size and portability of an air compressor. Higher horsepower compressors tend to be larger and heavier due to the need for more substantial motors and components to generate the increased power output. This can impact the ease of transportation and maneuverability, especially in portable or mobile applications.

When selecting an air compressor, it is essential to consider the specific requirements of your intended applications. Factors such as desired air pressure, airflow, duty cycle, and portability should be taken into account. It’s important to choose an air compressor with a horsepower rating that aligns with the demands of the tools and equipment you plan to operate, ensuring optimal performance and efficiency.

Consulting the manufacturer’s specifications and guidelines can provide valuable information on how the horsepower rating of an air compressor corresponds to its capabilities and suitability for different tasks.

air compressor

What are the key components of an air compressor system?

An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

1. Compressor Pump: The compressor pump is the heart of the air compressor system. It draws in ambient air and compresses it to a higher pressure. The pump can be reciprocating (piston-driven) or rotary (screw, vane, or scroll-driven) based on the compressor type.

2. Electric Motor or Engine: The electric motor or engine is responsible for driving the compressor pump. It provides the power necessary to operate the pump and compress the air. The motor or engine’s size and power rating depend on the compressor’s capacity and intended application.

3. Air Intake: The air intake is the opening or inlet through which ambient air enters the compressor system. It is equipped with filters to remove dust, debris, and contaminants from the incoming air, ensuring clean air supply and protecting the compressor components.

4. Compression Chamber: The compression chamber is where the actual compression of air takes place. In reciprocating compressors, it consists of cylinders, pistons, valves, and connecting rods. In rotary compressors, it comprises intermeshing screws, vanes, or scrolls that compress the air as they rotate.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air. It acts as a buffer, allowing for a steady supply of compressed air during peak demand periods and reducing pressure fluctuations. The tank also helps separate moisture from the compressed air, allowing it to condense and be drained out.

6. Pressure Relief Valve: The pressure relief valve is a safety device that protects the compressor system from over-pressurization. It automatically releases excess pressure if it exceeds a predetermined limit, preventing damage to the system and ensuring safe operation.

7. Pressure Switch: The pressure switch is an electrical component that controls the operation of the compressor motor. It monitors the pressure in the system and automatically starts or stops the motor based on pre-set pressure levels. This helps maintain the desired pressure range in the receiver tank.

8. Regulator: The regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications, ensuring a consistent and safe supply of compressed air.

9. Air Outlet and Distribution System: The air outlet is the point where the compressed air is delivered from the compressor system. It is connected to a distribution system comprising pipes, hoses, fittings, and valves that carry the compressed air to the desired application points or tools.

10. Filters, Dryers, and Lubricators: Depending on the application and air quality requirements, additional components such as filters, dryers, and lubricators may be included in the system. Filters remove contaminants, dryers remove moisture from the compressed air, and lubricators provide lubrication to pneumatic tools and equipment.

These are the key components of an air compressor system. Each component plays a crucial role in the generation, storage, and delivery of compressed air for various industrial, commercial, and personal applications.

China Best Sales CHINAMFG Truck Spare Parts Air Compressor Vg1560130080   with Good qualityChina Best Sales CHINAMFG Truck Spare Parts Air Compressor Vg1560130080   with Good quality
editor by CX 2023-09-30

China high quality High Pressure Air Compressor Air Pump Gas Compressor supplier

Product Description

Product Description
Oil-free Special Gas Compressor

Oil-free special gas compressor is the kind of semi-hermetic compressor, it adopts hermetic construction for its motor without pollution to the medium to be compressed and without leakage. This series compressor has numerous advantage of reliable performance, simple operation, compact construction, quick connection and so on. It can be applied in the compression and recovery of toxic, rare and precious gas such as SF6, helium, methane, ammonia, Freon, carbon dioxide and so on.

Performance Characteristics

Oil free high pressure freon recycle hydrogen oxygen nitrogen helium Co2 gas compressor
Principle
1: Oil-free type reciprocating piston
2 Cooling Type: Air-cooled or water-cooled
3 Power consumption: ≤ 110kw
4 Speed: . 300-560rpm
5 Flow: . ≤ 0.18-100Nm3 / h6
Suction pressure: . 0.005-4.5Mpa
7Exhaust pressure: . ≤ 18 Mpa
8 Compression Level: 1-4 stage, Air or water cooling oil-free compressors
Product Features: No oil lubrication with clean and non-polluting.
High efficiency, low energy consumption. High reliability, continuous 24-hour operation. The unit uses air-cooled or water-cooled, compact structure, operation and low maintenance cost

All our models can be customized. For more information, pleaes do not hesitate to contact.

Model SF-0.4/400 18.5KW 400bar S model
Power(Hp,Kw) 25,18
Working Pressure(Bar,Psi) 400,5750
Air Delivery(L/min,CFM) 400,14.1
Speed(r.p.m) 450
Voltage(V/Hz) 380/50
Noise(dB) 85
Net Weight(Kgs) 1200
Meas(L×W×H ,Cm) 180×135×120

Lubrication Style: Lubricated
Configuration: Stationary
Mute: Not Mute
Application: High Back Pressure Type
Type: Piston
Power Source: AC Power
Customization:
Available

|

air compressor

What are the advantages of using rotary vane compressors?

Rotary vane compressors offer several advantages that make them a popular choice for various applications. These compressors are widely used in industries where a reliable and efficient source of compressed air is required. Here are the advantages of using rotary vane compressors:

1. Compact and Lightweight:

Rotary vane compressors are typically compact and lightweight compared to other types of compressors. Their compact design makes them suitable for installations where space is limited, such as in small workshops or mobile applications. The lightweight nature of these compressors allows for easy transportation and maneuverability.

2. High Efficiency:

Rotary vane compressors are known for their high efficiency. The design of the vanes and the compression chamber allows for smooth and continuous compression, resulting in minimal energy losses. This efficiency translates into lower energy consumption and reduced operating costs over time.

3. Quiet Operation:

Rotary vane compressors operate with relatively low noise levels. The design of the compressor, including the use of vibration damping materials and sound insulation, helps to minimize noise and vibrations during operation. This makes rotary vane compressors suitable for applications where noise reduction is important, such as in indoor environments or noise-sensitive areas.

4. Oil Lubrication:

Many rotary vane compressors utilize oil lubrication, which provides several benefits. The oil lubrication helps to reduce wear and friction between the moving parts, resulting in extended compressor life and improved reliability. It also contributes to better sealing and improved efficiency by minimizing internal leakage.

5. Versatile Applications:

Rotary vane compressors are versatile and can be used in a wide range of applications. They are suitable for both industrial and commercial applications, including automotive workshops, small manufacturing facilities, dental offices, laboratories, and more. They can handle various compressed air requirements, from light-duty tasks to more demanding applications.

6. Easy Maintenance:

Maintenance of rotary vane compressors is relatively straightforward. Routine maintenance tasks typically include oil changes, filter replacements, and periodic inspection of vanes and seals. The simplicity of the design and the availability of replacement parts make maintenance and repairs easier and more cost-effective.

These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.

air compressor

Can air compressors be used for medical and dental applications?

Yes, air compressors can be used for various medical and dental applications. Compressed air is a reliable and versatile utility in healthcare settings, providing power for numerous devices and procedures. Here are some common applications of air compressors in medical and dental fields:

1. Dental Tools:

Air compressors power a wide range of dental tools and equipment, such as dental handpieces, air syringes, air scalers, and air abrasion devices. These tools rely on compressed air to generate the necessary force and airflow for effective dental procedures.

2. Medical Devices:

Compressed air is used in various medical devices and equipment. For example, ventilators and anesthesia machines utilize compressed air to deliver oxygen and other gases to patients. Nebulizers, used for respiratory treatments, also rely on compressed air to convert liquid medications into a fine mist for inhalation.

3. Laboratory Applications:

Air compressors are used in medical and dental laboratories for various purposes. They power laboratory instruments, such as air-driven centrifuges and sample preparation equipment. Compressed air is also used for pneumatic controls and automation systems in lab equipment.

4. Surgical Tools:

In surgical settings, compressed air is employed to power specialized surgical tools. High-speed air-driven surgical drills, saws, and bone-cutting instruments are commonly used in orthopedic and maxillofacial procedures. Compressed air ensures precise control and efficiency during surgical interventions.

5. Sterilization and Autoclaves:

Compressed air is essential for operating sterilization equipment and autoclaves. Autoclaves use steam generated by compressed air to sterilize medical instruments, equipment, and supplies. The pressurized steam provides effective disinfection and ensures compliance with rigorous hygiene standards.

6. Dental Air Compressors:

Specialized dental air compressors are designed specifically for dental applications. These compressors have features such as moisture separators, filters, and noise reduction mechanisms to meet the specific requirements of dental practices.

7. Air Quality Standards:

In medical and dental applications, maintaining air quality is crucial. Compressed air used in healthcare settings must meet specific purity standards. This often requires the use of air treatment systems, such as filters, dryers, and condensate management, to ensure the removal of contaminants and moisture.

8. Compliance and Regulations:

Medical and dental facilities must comply with applicable regulations and guidelines regarding the use of compressed air. These regulations may include requirements for air quality, maintenance and testing procedures, and documentation of system performance.

It is important to note that medical and dental applications have specific requirements and standards. Therefore, it is essential to choose air compressors and associated equipment that meet the necessary specifications and comply with industry regulations.

air compressor

What maintenance is required for air compressors?

Maintaining air compressors is essential to ensure their optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, improves efficiency, and reduces the risk of accidents. Here are some key maintenance tasks for air compressors:

1. Regular Inspection: Perform visual inspections of the air compressor to identify any signs of wear, damage, or leaks. Inspect the compressor, hoses, fittings, and connections for any abnormalities. Pay attention to oil leaks, loose bolts, and worn-out components.

2. Oil Changes: If your air compressor has an oil lubrication system, regular oil changes are crucial. Follow the manufacturer’s recommendations for the frequency of oil changes and use the recommended oil type. Dirty or degraded oil can impact compressor performance and lead to premature wear.

3. Air Filter Cleaning or Replacement: Clean or replace the air filter regularly to ensure proper air intake and prevent contaminants from entering the compressor. Clogged or dirty filters can restrict airflow and reduce efficiency.

4. Drain Moisture: Air compressors produce moisture as a byproduct of the compression process. Accumulated moisture in the tank can lead to rust and corrosion. Drain the moisture regularly from the tank to prevent damage. Some compressors have automatic drains, while others require manual draining.

5. Belt Inspection and Adjustment: If your compressor has a belt-driven system, inspect the belts for signs of wear, cracks, or tension issues. Adjust or replace the belts as necessary to maintain proper tension and power transmission.

6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

7. Valve Maintenance: Check the safety valves, pressure relief valves, and other valves regularly to ensure they are functioning correctly. Test the valves periodically to verify their proper operation.

8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

10. Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s manual for specific maintenance instructions and recommended service intervals for your air compressor model. They provide valuable information on maintenance tasks, lubrication requirements, and safety precautions.

Regular maintenance is vital to keep your air compressor in optimal condition and extend its lifespan. It’s also important to note that maintenance requirements may vary depending on the type, size, and usage of the compressor. By following a comprehensive maintenance routine, you can ensure the reliable operation of your air compressor and maximize its efficiency and longevity.

China high quality High Pressure Air Compressor Air Pump Gas Compressor   supplier China high quality High Pressure Air Compressor Air Pump Gas Compressor   supplier
editor by CX 2023-09-30

China high quality Screw Air Compressor (SCR25EPM Series) Unique Designed Duel Layer Oil Cooled Pm Motor High Efficiency Ariend air compressor repair near me

Product Description

Product Description

Product Technical Description

Model :   Energy Saving Series (EPM)
Type:  Oil Injected Permanent Magnetic Screw Compressor
Voltage:  380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements
Working Pressure:  7~13bar
Installed Motor Power:  15~110 Kw
Color:  Blue
Driven Method: Taper Connection Direct Driven
Air End:  Original Ally-win Air End from Germany.
Trademark:  SCR
Transport Package:  Standard Wooden Packing
Available Certificate:  CE, ISO, UL, ASME, GHOST
Origin:  ZheJiang , China
application:  Casting,Metal,Plastic,Rubber

Product Features

Product Features

1. China-Japan latest technology cooperation, high reliability.

2. Oil Cooling  Permanent Magnetic Motor.

3. IP65 protection grade & heavy duty air filter, suitable for high dusty environment. 

4. IE4 Efficiency motor efficiency.

5.Max.RPM 1500,low noise,high efficiency,better life-span.

6. Most energy saving mode, Only work at loading.

7. Wide frequency range 30%-100%.

8. Premium Magnetic material resist more than 180ºC temp.

9. Reliable PM motor supplier from Italy.

10. Direct Taper connection, no transmission power loss, easy maintenance.

11.Touch Screen PLC with preset running schedule, more intelligent control.

12. Precise VSD technology control.

13. Easy for installation and service.

14. Fantastic Energy Saving, save up to more than 30-40%.

Specially designed PM motor:

The PM motor efficiency is even higher than IE3 premium efficiency motors. The motor uses high performance magnetic materials giving many advantages such as bearing free operation, grease free maintenance, direct 1:1 coupling without transmission losses, low noise and low vibration leading to a compact structure.

Enhanced Energy Savings:

When demand is low the PM low pressure compressor firstly reduces the speed to maintain the correct flow demand. If the air demand stops the compressor enters standby mode, saving further energy. The compressor automatically restarts and runs when the pressure drops below its setpoint.

The latest generation intelligent touchscreen controller:

SCR’s latest touchscreen interface allows simple intelligent control for your compressor. Pressure and scheduling times can be easily programmed allowing you to automatically start and stop the compressor to match production times. Remote operation and real time monitoring are built in the controller as standard.

Model SCR25EPM-7 SCR25EPM-8 SCR25EPM-10
Capacity/Pressure(m3/min,/BAR) 3.7/7 3.5/8 2.9/10
PM Motor Power(KW) 18.5KW(25H.P)
Speed(r/min) 1700
Starting way VSD Startup
Volt(V) 380/400/415(220)
Motor safety grade IP65
Motor isolation grade F
Electrical Supply 380(400,415)V/50Hz/3Phase, 220V/60HZ/3P
Outlet Temperature(ºC) ≤ ambient Temperature+10ºC
Driven way Direct Driven
Noise level at 1 meter 68±3dB(A)
Cooling method Air Cooling
Oil content 1~3 ppm
Outlet Connection R 1
Dimension Length(mm) 1200
Width(mm) 800
Height(mm) 1100
Weight(KG) 480

Product Categories

Certifications

Company Profile

Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Structure Type: Whole Machine
Installation Type: Stationary Type
Type: Twin-Screw Compressor
Customization:
Available

|

air compressor

Can air compressors be used for cleaning and blowing dust?

Yes, air compressors can be effectively used for cleaning and blowing dust in various applications. Here’s how air compressors are utilized for these purposes:

1. Cleaning Machinery and Equipment:

Air compressors are commonly used for cleaning machinery and equipment in industries such as manufacturing, automotive, and construction. Compressed air is directed through a nozzle or blowgun attachment to blow away dust, debris, and other contaminants from surfaces, crevices, and hard-to-reach areas. The high-pressure air effectively dislodges and removes accumulated dust, helping to maintain equipment performance and cleanliness.

2. Dusting Surfaces:

Air compressors are also employed for dusting surfaces in various settings, including homes, offices, and workshops. The compressed air can be used to blow dust off furniture, shelves, electronic equipment, and other objects. It provides a quick and efficient method of dusting, especially for intricate or delicate items where traditional dusting methods may be challenging.

3. Cleaning HVAC Systems:

Air compressors are utilized for cleaning HVAC (Heating, Ventilation, and Air Conditioning) systems. The compressed air can be used to blow dust, dirt, and debris from air ducts, vents, and cooling coils. This helps improve the efficiency and air quality of HVAC systems, preventing the buildup of contaminants that can affect indoor air quality.

4. Blowing Dust in Workshops:

In workshops and garages, air compressors are often used to blow dust and debris from workbenches, power tools, and work areas. Compressed air is directed to blow away loose particles and maintain a clean and safe work environment. This is particularly useful in woodworking, metalworking, and other trades where dust and debris can accumulate during the manufacturing or fabrication processes.

5. Cleaning Electronics and Computer Equipment:

Air compressors are employed for cleaning electronics and computer equipment. The compressed air is used to blow dust and debris from keyboards, computer cases, circuit boards, and other electronic components. It helps in preventing overheating and maintaining the proper functioning of sensitive electronic devices.

6. Industrial Cleaning Applications:

Air compressors find extensive use in industrial cleaning applications. They are employed in industrial settings, such as factories and warehouses, for cleaning large surfaces, production lines, and equipment. Compressed air is directed through specialized cleaning attachments or air-operated cleaning systems to remove dust, dirt, and contaminants efficiently.

When using air compressors for cleaning and blowing dust, it is important to follow safety precautions and guidelines. The high-pressure air can cause injury if directed towards the body or sensitive equipment. It is advisable to wear appropriate personal protective equipment, such as safety glasses and gloves, and ensure that the air pressure is regulated to prevent excessive force.

Overall, air compressors provide a versatile and effective solution for cleaning and blowing dust in various applications, offering a convenient alternative to traditional cleaning methods.

air compressor

Can air compressors be used for medical and dental applications?

Yes, air compressors can be used for various medical and dental applications. Compressed air is a reliable and versatile utility in healthcare settings, providing power for numerous devices and procedures. Here are some common applications of air compressors in medical and dental fields:

1. Dental Tools:

Air compressors power a wide range of dental tools and equipment, such as dental handpieces, air syringes, air scalers, and air abrasion devices. These tools rely on compressed air to generate the necessary force and airflow for effective dental procedures.

2. Medical Devices:

Compressed air is used in various medical devices and equipment. For example, ventilators and anesthesia machines utilize compressed air to deliver oxygen and other gases to patients. Nebulizers, used for respiratory treatments, also rely on compressed air to convert liquid medications into a fine mist for inhalation.

3. Laboratory Applications:

Air compressors are used in medical and dental laboratories for various purposes. They power laboratory instruments, such as air-driven centrifuges and sample preparation equipment. Compressed air is also used for pneumatic controls and automation systems in lab equipment.

4. Surgical Tools:

In surgical settings, compressed air is employed to power specialized surgical tools. High-speed air-driven surgical drills, saws, and bone-cutting instruments are commonly used in orthopedic and maxillofacial procedures. Compressed air ensures precise control and efficiency during surgical interventions.

5. Sterilization and Autoclaves:

Compressed air is essential for operating sterilization equipment and autoclaves. Autoclaves use steam generated by compressed air to sterilize medical instruments, equipment, and supplies. The pressurized steam provides effective disinfection and ensures compliance with rigorous hygiene standards.

6. Dental Air Compressors:

Specialized dental air compressors are designed specifically for dental applications. These compressors have features such as moisture separators, filters, and noise reduction mechanisms to meet the specific requirements of dental practices.

7. Air Quality Standards:

In medical and dental applications, maintaining air quality is crucial. Compressed air used in healthcare settings must meet specific purity standards. This often requires the use of air treatment systems, such as filters, dryers, and condensate management, to ensure the removal of contaminants and moisture.

8. Compliance and Regulations:

Medical and dental facilities must comply with applicable regulations and guidelines regarding the use of compressed air. These regulations may include requirements for air quality, maintenance and testing procedures, and documentation of system performance.

It is important to note that medical and dental applications have specific requirements and standards. Therefore, it is essential to choose air compressors and associated equipment that meet the necessary specifications and comply with industry regulations.

air compressor

What is the impact of tank size on air compressor performance?

The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:

1. Air Storage Capacity: The primary function of the air compressor tank is to store compressed air. A larger tank size allows for greater air storage capacity. This means the compressor can build up a reserve of compressed air, which can be useful for applications that require intermittent or fluctuating air demand. Having a larger tank ensures a steady supply of compressed air during peak usage periods.

2. Run Time: The tank size affects the run time of the air compressor. A larger tank can provide longer continuous operation before the compressor motor needs to restart. This is because the compressed air in the tank can be used to meet the demand without the need for the compressor to run continuously. It reduces the frequency of motor cycling, which can improve energy efficiency and prolong the motor’s lifespan.

3. Pressure Stability: A larger tank helps maintain stable pressure during usage. When the compressor is running, it fills the tank until it reaches a specified pressure level, known as the cut-out pressure. As the air is consumed from the tank, the pressure drops to a certain level, known as the cut-in pressure, at which point the compressor restarts to refill the tank. A larger tank size results in a slower pressure drop during usage, ensuring more consistent and stable pressure for the connected tools or equipment.

4. Duty Cycle: The duty cycle refers to the amount of time an air compressor can operate within a given time period. A larger tank size can increase the duty cycle of the compressor. The compressor can run for longer periods before reaching its duty cycle limit, reducing the risk of overheating and improving overall performance.

5. Tool Compatibility: The tank size can also impact the compatibility with certain tools or equipment. Some tools, such as high-demand pneumatic tools or spray guns, require a continuous and adequate supply of compressed air. A larger tank size ensures that the compressor can meet the air demands of such tools without causing pressure drops or affecting performance.

It is important to note that while a larger tank size offers advantages in terms of air storage and performance, it also results in a larger and heavier compressor unit. Consider the intended application, available space, and portability requirements when selecting an air compressor with the appropriate tank size.

Ultimately, the optimal tank size for an air compressor depends on the specific needs of the user and the intended application. Assess the air requirements, duty cycle, and desired performance to determine the most suitable tank size for your air compressor.

China high quality Screw Air Compressor (SCR25EPM Series) Unique Designed Duel Layer Oil Cooled Pm Motor High Efficiency Ariend   air compressor repair near meChina high quality Screw Air Compressor (SCR25EPM Series) Unique Designed Duel Layer Oil Cooled Pm Motor High Efficiency Ariend   air compressor repair near me
editor by CX 2023-09-27

China 10hp High Quality Screw Type Air Compressor With Air End with Great quality

Relevant Industries: Accommodations, Garment Outlets, Developing Material Retailers, Manufacturing Plant, Machinery Restore Stores, Meals & Beverage Manufacturing facility, Farms, Cafe, Residence Use, Retail, Foodstuff Shop, Printing Shops, Design works , Vitality & Mining, Meals & Beverage Shops, Promoting Company
Showroom Area: None
Problem: New
Sort: Screw
Configuration: Stationary
Electrical power Supply: AC Electricity
Lubrication Fashion: Lubricated
Mute: Sure
Design Number: NXGV-7.5HC
Voltage: 220v/380v(can be custom-made), 220V/380V/Personalized
Dimension(L*W*H): 940*650*830mm
Fat: 165Kg
Guarantee: 1 Yr
Doing work Pressure: 7 bar, 8 bar, 900rpm worm gear reducer,equipment box , equipment motor 13 bar, 12 bar, ten bar
Air capacity: .5-1.1m3/min
Machinery Take a look at Report: Offered
Video outgoing-inspection: Presented
Marketing and advertising Sort: New Solution 2571
Guarantee of core parts: 2 a long time
Core Parts: PLC, Motor, Motor, Pump
Gas Variety: Air
Air shipping: .5-1.1m3/min
Strain: 8-13bar
Motor electricity: 7.5kw/10hp
Cooling type: Air Cooling Screw Compressor
Manufacturer: Xihu (West Lake) Dis.ang
Colour: Custom-made Colour
Starting up Manner: Variable Frequency Commencing
Sounds: 68±2dB
Solution identify: Screw Air Compressor
Packaging Information: Nude package for machines, Picket box package deal for spare components, Or as customers’ requests.
Port: HangZhou/ZheJiang /nibo

Solution TitleScrew Air compressor
ModelNXGV-7.5HC
Motor Power7.5KW/10HP
Operating Pressureseven-13bar
Coling Approach Air Cooling
Capability.5-1.1m³/min
Voltage380V/220V/personalized
Driving ApproachDirect
Size940*650*830
Product Characteristicsone. Substantial efficiency everlasting magnet motor, compared with normal a few-step out-of-stage motor, strength preserving is about 6-7%.2.Adopt the new generation of variety line host, break up coupling framework, compact and secure, higher strength effectiveness.3.Smart frequency conversion engineering, 30% strength saving in comparison with ordinary energy frequency air compressor.4.High-effectiveness motor of CZPT manufacturer, defense quality IP23/IP54, insulation grade F, CZPT heavy obligation bearing, Wholesale bike fix equipment Jumbo Chain Tool hefty obligation chain breaker theefficiency is 3-5% increased than comparable merchandise.
ModelKWHPCapacityPressureDimension(mm)WeightSize
NXGV-7.5HC7.5101.10.eight940*650*830165DN15
1.1.
0.81.3
NXGV-11HC11151.six0.81080*750*1000310DN20
1.41.
1.two1.three
NXGV-15HC15202.40.81080*750*1000310
2.one1.
1.seven1.3
NXGV-18HC18253.0.eight1380*850*1160400DN25
2.seven1.
2.three1.3
NXGV-22HC22303.70.81380*850*1160430
3.41.
2.eight1.3
NXGV-30HC30405.0.eight1380*850*1160480
4.three1.
3.71.three
NXGV-37HC37506.eight0.eight1500*1000*1330620DN40
6.two1.
5.1.three
NXGV-45HC45608.0.81500*one thousand*1330720
7.1.
5.81.3
NXGV-55HC55759.eight0.81800*1250*16701480DN50
9.1.
7.eight1.three
NXGV-75HC7510013.one0.eight1800*1250*16701680
11.eight1.
9.81.three
NXGV-90HC9012016.80.eight1800*1250*16701880
14.six1.
11.six1.three
NXGV-110HC11015020.0.82560*1650*19002400DN80
17.eight1.
14.51.three
NXGV-132HC13218023.two0.eight2560*1650*19002700DN100
20.seven1.
16.91.three
Note:Standard voltage is 380V/50HZ/3P, other voltage is offered. The advised very best capacity range is sixty%-one hundred%. Large altitude, large temperature, substantial humidity, large dust hundreds or other adverse operating circumstances will demand specialised personalized types.So we can personalize products according to your unique needs.If you have any concerns about item customization, you can notify us in progress. We are delight to provide you. Welcome to consult. FAQQ1: Who is Xihu (West Lake) Dis.ang Air Compressor?A: ZheJiang Xihu (West Lake) Dis.ang Air Compressor Co., Ltd, started in 1985, is a professional energy-saving air compressor company integrating R&D, production, advertising and marketing and service. Our products are famed for large performance, energy preserving, substantial dependability, high value-effectiveness, low sound and high duration. The business introduces innovative engineering, layout concept, and rigorous production process of Germany. Q2: Why Decide on us?A: Our products are all competent by CE & chain travel sprocket rates double chain push differential sprocket moveable photo printer eighteen tooth sprocket ISO 9001. Our company introduces the advanced technology of German screw equipment, adhering to the German industrial design and style idea and demanding manufacturing process, specializing in CZPT design, production and revenue enterprises. We have ten many years exporting experience, which has helped us earn far more than fifty loyal overseas agents. We warmly welcome your small demo get for good quality or industry check.Q3: Which payment phrases you can settle for?A: We can settle for versatile payment consist of Lender Transfer, LC, DP, West Union, Paypal, or Combination phrases as negotiation.This autumn: Can you do OEM and ODM? A: Yes, OEM and ODM are both available for us. With the requirements customization of the materials, hues, design, the simple portions will be recommended after we reviewed with each other.Q5: Which shipping and delivery way can you provide? A: We can offer shipping and delivery by sea, by air , by categorical and and so on in accordance to buyer requirements.Q6: How to location purchase?A: When you are ready to buy, make sure you make contact with us for validate the ideal solution & prepare & 428 did motorcycle chain motorcycles in china model. What are not able to be disregarded is you need to give a duplicate buy purchase to ensure that your get is processed properly.Q7: How about your after-product sales support?A: 1. Supply customers with installation and commissioning on the internet guidelines. 2.Put together and Nicely-qualified engineers obtainable to overseas service inside 1 yr. 3. CZPT agents and right after support offered.

air-compressor

A Buyer’s Guide to Air Compressor Types

There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with two pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.

Single-stage air compressors

A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the two types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.

Rotary vane compressors

Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last nine to eighteen months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.
air-compressor

Rotary vane compressors with low-noise models

If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for two to five diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.
air-compressor

Rotary vane compressors with two pistons

The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose one with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.

China 10hp High Quality Screw Type Air Compressor With Air End     with Great qualityChina 10hp High Quality Screw Type Air Compressor With Air End     with Great quality
editor by Cx 2023-06-29

China 12v Mini Car Tyre Electric Portable Air Pump Air Compressor Max White Battery Charging ROHS Color Weight Input Origin with high quality

Model: CL, 1 (F21), 1 (F20), 02 Touring (E6), 1 (E81), 1 (E87), 1 (F40), 1, 1 Series, F-350 Tremendous Obligation Crew Taxi Choose Up, E-550 Tremendous Duty Cutaway Van, H1, accent, cherokee, ,RC300,RC350,RCF,RCTurbo(AWD,FSport,RWD), es, CT200H, CT (ZWA10_), Aviator, 2 Eleven, 3 ELEVEN Convertible, DELICA IV Platform/Chassis (TG1_), Armada(4wd,LE,RWD,SE), ARMADA (Y62), Armada(AWD,RWD), VANGUARD (_A3_), ToyotaAvalon, CZPT ACE Platform/Chassis (_Y2_), ENCORE (SM3), Encore, ENCLAVE (SN3), Rav 4 Mk2, WILDLANDER (_XA_), LEVIN (ZRE18_, ZWE18_), YARIS L, 4Runner, FJ Cruiser, Tundra, COROLLA, AVENSIS, PREVIA, Rav 4, LAND CRUISER PRADO (J15), AVALON (_XA5_, _XH5_), CZPT ROYAL (S210), RAV4 (_A5_, _H5_), COROLLA (_E21_), Motorbike Transmissions Higher-high quality Racing Motorbike Sprocket and Chain Set for Suzuki DL250 (47T 14T 520H XR-Ring a hundred and twenty Hyperlinks) 9 – sequence, Equator, GIXXER, GRANSE MPV, MT, RAY, fzs
12 months: 2011-2012, 2005-2012, 2012-2016, 2009-2013, 2006-2012, 2007-2012, 2007-2013, 2571-2016, 2011-2016, 2013-2016, 2008-2012, 2008-2013, 2015-2016, 2011-2011, 2002-2006, 2006, 2002-2004, 2571-2011, 2571, 2571-2016, 2015-2016, 2008-2009, 2012-2013, 2011-2016, 2008-2011, 2014-2018, 2571-2016, 2013-2016, 2014-2014, 2014-2016, 2015-2016, 2012-2016, 2001-2006, 2003-2006, 1996-2001, 2006-2012, 2005, 2003-2005, 2001-2003, 2001-2002, 2003, 2571-, 2003-2013, 2571-, 2011-, 2006-2011, 1971-1975, 2011, 2012-, 2001-2003, 2011-, 2005-, 2003-2006, 2013-, High High quality Aluminum Alloy Rim seventeen Bike Supermoto Wheels For Exc Sxf 2571-2013, 2005-2008, 2005-2571, 2001-2571, 2006-2571, 2015-, 2571-, 2014-, 2007-2012, 2017-, 2571-, 2011-2013, 2571-2013, 2016-, 1988-2003, 2015-2018, 2007-2011, 2005-2015, 2016-, 2017-, 2571-, 2011, 2009-2012, 2009-2571, 2019-, 2019-, 2019-, 2019-, 2019-, 2019-, 2571-, 2571-, 2019-, 2571-, 2019-, 2019-, 2019-, 2571-, 2019-, 2571-
Voltage: 12V
Vehicle Fitment: BUICK (SGM), LOTUS, Hummer, CZPT (FAW), JEEP, MITSUBISHI, PUMA, CZPT (GAC), Nissan, CZPT Usa, Suzuki Truck, Lexus, SUZUKI Bikes, CZPT – Europe Vehicle, CZPT – Europe Truck, ACURA, JINBEI, Hyundai, CZPT TRUCK, bmw, CZPT Bikes, WMRV series conveyor push worm equipment reductor reductores with double reduction worm Toyota, LINCOLN
Max Force: one hundred and one-150Psi
Measurement: one hundred ninety*96*fifty four
Product Quantity: RLA-2301
Warranty: twelve Months
Function: Unexpected emergency Light-weight, Energy Indicator, Tire Stress Check
Item identify: 12-Volt Electronic Air Pump
Materials: Ab muscles
Shade: Black
Air Efficiency: 25L/min
COB Gentle: 1.5W, 150LM
Outer Air Hose Size: 50cm
Strain models: PSI, BAR, KPA, KG/CM2
Packing: Shade Box
Key phrase: Auto Tire Air Pump Compressor
Bodyweight: .8KG
Packaging Information: 10PCS/CTN
Port: NIGNBO/ZheJiang

Specification

itemvalue
Voltage12V
Max Strain101-150Psi
Size190*ninety six*54
Place of OriginChina
ZHangZhoug
Brand IdentifyRealine
Model VarietyRLA-2301
Warranty12Months
FunctionEmergency Light, Power Indicator, Tire Strain Monitor
Product name12-Volt Electronic Air Pump
MaterialABS
ColorBlack
Air Performance25L/min
COB Light-weight1.5W, 150LM
Outer Air Hose Length50cm
Pressure unitsPSI, BAR, KPA, KG/CM2
PackingColor Box
KeywordCar Tire Air Pump Compressor
Weight0.8KG
Business Profile HangZhou Realine Instruments Co.,Ltd is a young Vehicle equipment company . We developed in 2016. Following 3 years of growth, we can supply more than 32 kinds of DC 12V air compressor ,fifteen kinds of battery charger, ten varieties of vacuum cleaner and other kinds of components. And we export to other region consumer like you directly given that 2019.We want to be much better with our team and buyer support. Our team, incorporate 3 engineers operate in this region more than ten many years, acquire office, QC office and revenue provider section. A single new task, from solution advancement to source sample, we can recognize it in 30 days. Our purchase division make positive the content on time. Our quality control group make positive our mass items good quality steady. Our income support crew communication and offer with every single kind of problem during in 24 hours with consumer. We are Realine, make confident your concept Recognize. FAQ 1. who are we?We are dependent in ZHangZhoug, China, begin from 2016,offer to Jap Europe(30.00%),North The us(20.00%),Northern Europe(fifteen.00%),South The us(10.00%),Western Europe(10.00%),Mid East(10.00%),Southern Europe(5.00%),South Asia(.00%),Eastern Asia(.00%),Oceania(.00%),Central The united states(.00%),Africa(.00%),Domestic Industry(.00%),Southeast Asia(.00%). There are total about 11-fifty individuals in our place of work.2. how can we promise good quality?Often a pre-generation sample before mass productionAlways last Inspection just before shipment3.what can you acquire from us?Air Compressor Vacuum Cleaner4. why should you purchase from us not from other suppliers?We are in Automobile add-ons objects much more than 10 years . And we can style , make DC 12 V tire inflators ,battery chargers for auto battery ,DC 12 V vacuum cleaners ,auto supporters and far more than fifty kinds of mold . We can offer OEM services.5. what services can we supply?Accepted Shipping and delivery Terms: FOB,CIF,EXW,FCA,Convey Delivery;Accepted Payment Forex:USD,EUR,GBP,CNYAccepted Payment Variety: T/T,L/C,D/P D/A,Western UnionLanguage Spoken:English, DINANSIJIS Regular Chain Wheel Sprocket for Agriculture Carbon Metal Sprocket ANSI Gear Hardened 3 Years Clients OEM,ODM Chinese

air-compressor

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China 12v Mini Car Tyre Electric Portable Air Pump Air Compressor Max White Battery Charging ROHS Color Weight Input Origin     with high qualityChina 12v Mini Car Tyre Electric Portable Air Pump Air Compressor Max White Battery Charging ROHS Color Weight Input Origin     with high quality
editor by Cx 2023-06-27