Product Description
Model | DS75S7F | |||||||||
Compressor | Air delivery |
m3/min | 2.2 | |||||||
cu.ft/min | 75 | |||||||||
Discharge pressure | bar | 7 | ||||||||
psig | 101.5 | |||||||||
Lubricating Oil capacity | L | 20 | ||||||||
Diesel Engine |
Manufacture&Model | 2V08E | ||||||||
Displacement(L) | 0.794 | |||||||||
Rotation speed(Rmp) | Operating | 3600 | ||||||||
Idle speed(r/min) | 2200 | |||||||||
Rated power(KW) |
16 |
|||||||||
Lubricating Oil capacity(L) | 2.5 | |||||||||
Battery |
95D31RX/6-QW-125MIN |
Standard Configuration |
. Suction valve Lubricating oil filter Oil thermostatic valve 50°C radiator
Solenoid valve Vertical air/oil tank Pressure regular valve Air/oil separator
Lubricating oil radiator Safety valve Emergency stop button Air filter of engine
Minimum pressure valve Lockable battery isolator switch
Air filter of compressor Vent valve Powder coated canopy Shuttle valve
24V sealed for life maintenance free battery Fuel tank for 8 hours running
General Features |
Application areas |
Field | Application | Nominal Working Pressure(bar) | Free Air Delivery Range(m3/min) | |||||||
General Construction (building sites, road maintenance, bridges, tunnels, concrete pumping and shotcreting) |
Hand-held pneumatic breakers | 7~14 | 5~13 | |||||||
Jack hammers | ||||||||||
Air guns | ||||||||||
Shotcrete equipment | ||||||||||
Pneumatic wrenches | ||||||||||
Nut runners | ||||||||||
Ground Engineering Drilling (basement and foundation excavation for apartment blocks and other buildings) |
Pneumatic rock drills | 7~17 | 12~28 | |||||||
Block cutters | ||||||||||
Dewatering pumps. | ||||||||||
Hand-held pneumatic breakers | ||||||||||
Utility, CZPT Blasting (shipyards, steel construction and large renovation jobs) |
Sandblasting (remove rust, scale, paint) |
7~10 | 10~22 | |||||||
Blast Hole Drilling (aggregate production for construction stabilization, cement production in limestone quarries and open pit mining) |
Rock drills | 14~21 | 12~29 | |||||||
Dewatering pumps | ||||||||||
Hand-held breakers | ||||||||||
High Pressure Drilling (drilling for water wells and foundations for high-rise buildings, along with geotechnical/geothermal applications) |
Water well drilling | 20~35 | 18~40 | |||||||
DTH drilling | ||||||||||
Rotary drilling |
Selection table |
Small Series | ||||||||||
Small Series | FAD | Pressure | Engine model | Dimensional Date(mm) | ||||||
m3/min | cfm | Bar | psig | length | width | height | weight(kg) | |||
model | with tow bar | without tow bar | ||||||||
MDS55S-7 | 1,55 | 55 | 7 | 101,5 | D902 | 2925 | 1650 | 1200 | 1200 | 600 |
MDS80S-7 | 2,24 | 80 | 7 | 101,5 | D1005 | 2925 | 1650 | 1200 | 1200 | 630 |
MDS100S-7 | 2,8 | 100 | 7 | 101,5 | V1505 | 2925 | 1650 | 1200 | 1200 | 640 |
MDS125S-7 | 3,5 | 125 | 7 | 101,5 | V1505 | 3065 | 1800 | 1500 | 1350 | 810 |
MDS130S-8 | 3,7 | 132 | 8 | 116 | JE493 | 3065 | 1800 | 1500 | 1350 | 810 |
MDS185S-7 | 5,18 | 185 | 7 | 101,5 | JE493 | 3200 | 1900 | 1740 | 1660 | 950 |
MDS185S-10 | 5,18 | 185 | 10 | 145 | JE493 | 3050 | 1900 | 1740 | 1660 | 950 |
Middle Series (Low&Medium pressure) | ||||||||||
Middle Series (Low&Medium pressure) | FAD | Pressure | Engine model | Dimensional Date(mm) | ||||||
m3/min | cfm | Bar | psig | length | width | height | weight(kg) | |||
model | with tow bar | without tow bar | ||||||||
MDS265S-7 | 7,42 | 265 | 7 | 101,5 | JE493 | 3629 | 2200 | 1700 | 1470 | 1200 |
MDS300S-14 | 8,4 | 300 | 14 | 203 | 4BTA3.9 | 3850 | 2600 | 1810 | 2378 | 1800 |
MDS350S-10 | 9,9 | 354 | 10 | 145 | 4BT3.9 | 3850 | 2600 | 1810 | 2378 | 1800 |
MDS390S-7 | 11 | 393 | 7 | 101,5 | 4BTA3.9 | 3850 | 2600 | 1810 | 2378 | 1800 |
MDS390S-13 | 11 | 393 | 13 | 188,5 | QSB4.5 | 3850 | 3100 | 1810 | 2378 | 1980 |
MDS429S-7 | 12 | 429 | 7 | 101,5 | 4BTA3.9 | 3850 | 2600 | 1810 | 2378 | 1800 |
MDS429S-14 | 12 | 429 | 14 | 203 | QSB4.5 | 3850 | 3100 | 1810 | 2378 | 1980 |
MDS500S-14 | 14,1 | 504 | 14 | 203 | 6BTAA5.9 | 4550 | 3600 | 1810 | 2378 | 3100 |
MDS690S-14 | 19,3 | 689 | 14 | 203 | QSB6.7 | 4950 | 3300 | 2170 | 2620 | 3500 |
MDS720S-10 | 20,2 | 721 | 10 | 145 | QSB6.7 | 4950 | 3300 | 2170 | 2620 | 3500 |
MDS750S-12 | 21 | 750 | 12 | 174 | QSB6.7 | 4950 | 3300 | 2170 | 2620 | 3500 |
MDS786S-10.3 | 22 | 786 | 10,3 | 149,35 | QSB6.7 | 4950 | 3300 | 2170 | 2620 | 3500 |
MDS820S-14 | 23 | 821 | 14 | 203 | 6LTAA8.9 | 5300 | 4200 | 2170 | 2630 | 5200 |
MDS850S-8.6 | 24 | 857 | 8,6 | 124,7 | 6CTAA8.3 | 5300 | 4200 | 2170 | 2630 | 4600 |
MDS900S-7.1 | 25,3 | 904 | 7,1 | 102,95 | 6CTA8.3 | 5300 | 4200 | 2170 | 2630 | 4600 |
Middle Series (Medium&High pressure) | ||||||||||
Middle Series (Medium&High pressure) | FAD | Pressure | Engine model | Dimensional Date(mm) | ||||||
m3/min | cfm | Bar | psig | length | width | height | weight(kg) | |||
model | with tow bar | without tow bar | ||||||||
MDS460S-17 | 13 | 464 | 17 | 246,5 | 6BTAA5.9 | 4600 | 3500 | 1800 | 2230 | 3500 |
MDS620S-17 | 17,4 | 621 | 17 | 246,5 | 6LTAA8.9 | 5300 | 4200 | 2170 | 2630 | 5200 |
MDS650S-19 | 18,2 | 650 | 19 | 275,5 | QSL8.9 | 5300 | 4200 | 2170 | 2630 | 5200 |
MDS690S-20.4 | 19,4 | 693 | 20,4 | 295,8 | 6LTAA8.9 | 5300 | 4200 | 2170 | 2630 | 5200 |
MDS770S-21 | 21,6 | 771 | 21 | 304,5 | 6LTAA8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
MDS830S-18 | 23,2 | 830 | 18 | 261 | 6LTAA8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
MDS820S-25 | 23 | 821 | 25 | 362,5 | QSM11 | 5300 | 4200 | 2100 | 2630 | 5600 |
MDS860S-20.4/17.3 | 24,2 | 864 | 20,4 | 295,8 | QSL8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
24,2 | 864 | 17,3 | 250,85 | |||||||
MDS875S-23 | 24,5 | 875 | 23 | 333,5 | QSM11 | 5300 | 4200 | 2100 | 2630 | 5600 |
Large Series (Low&Medium pressure) | ||||||||||
Large Series (Low&Medium pressure) | FAD | Pressure | Engine model | Dimensional Date(mm) | ||||||
m3/min | cfm | Bar | psig | length | width | height | weight(kg) | |||
model | with tow bar | without tow bar | ||||||||
MDS900S-14.2/10.5 | 25,1 | 896 | 14,2 | 205,9 | 6LTAA8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
25,2 | 900 | 10,5 | 152,25 | |||||||
MDS910S-14 | 25,6 | 914 | 14 | 203 | 6LTAA8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
MDS970S-10 | 27,2 | 971 | 10 | 145 | QSL8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
MDS1011S-8.6 | 28,3 | 1011 | 8,6 | 124,7 | QSL8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
MDS1054S-12 | 29,5 | 1054 | 12 | 174 | QSL8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
MDS1250S-8.6 | 35 | 1250 | 8,6 | 124,7 | QSL8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
MDS1400S-13 | 40 | 1400 | 13 | 188,5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 5800 |
MDS1600S-10.3 | 45 | 1600 | 10,3 | 149,35 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 5800 |
MDS1785S-13 | 50 | 1785 | 13 | 188,5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 5800 |
MDS2140S-10 | 60 | 2142 | 10 | 145 | QSZ14 | 7400 | 5400 | 2230 | 2630 | 8400 |
Large Series (Medium&High pressure) | ||||||||||
Large Series (Medium&High pressure) | FAD | Pressure | Engine model | Dimensional Date(mm) | ||||||
m3/min | cfm | Bar | psig | length | width | height | weight(kg) | |||
model | with tow bar | without tow bar | ||||||||
MDS900S-20 | 25,3 | 904 | 20 | 290 | QSM11 | 5300 | 4200 | 2100 | 2630 | 5800 |
MDS960S-18 | 26,9 | 961 | 18 | 261 | QSM11 | 5300 | 4200 | 2100 | 2630 | 5800 |
MDS1000S-35 | 28,2 | 1000 | 35 | 507,5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 |
MDS1089S-25 | 30,5 | 1089 | 25 | 362,5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 |
MDS1200S-24 | 33,6 | 1200 | 24 | 348 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 |
MDS1250S-21 | 35 | 1250 | 21 | 304,5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 |
MDS1250S-25 | 35 | 1250 | 25 | 362,5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 |
MDS1250S-30 | 35 | 1250 | 30 | 435 | WP17G770E302 | 6200 | 4700 | 2100 | 2630 | 7800 |
MDS1250S-35 | 35 | 1250 | 35 | 507,5 | WP17G770E302 | 6200 | 4700 | 2100 | 2630 | 7800 |
MDS1250S-40 | 35 | 1250 | 40 | 580 | WP17G770E302 | 6200 | 4700 | 2100 | 2630 | 7800 |
MDS1428S-18 | 40 | 1428 | 18 | 261 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 |
MDS1428S-35 | 40 | 1428 | 35 | 507,5 | TAD1643VE-B | 7400 | 5500 | 2180 | 2650 | 10000 |
MDS1428S-40 | 40 | 1428 | 40 | 580 | QSK19 | 7400 | 5500 | 2180 | 2650 | 10000 |
MDS1600S-25 | 44,8 | 1600 | 25 | 362,5 | WP17G770E302 | 7400 | 5500 | 2180 | 2650 | 10000 |
GTL Air compressor test system |
After-sales Service: | Online |
---|---|
Warranty: | 1year |
Lubrication Style: | Lubricated |
Cooling System: | Water Cooling |
Power Source: | Diesel Engine |
Cylinder Position: | Vertical |
Choose an Air Compressor for Your Business
There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
Positive displacement
Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
Single-stage
The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
low noise
Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
editor by CX 2023-05-26
China Water Cooling Type Screw Air Compressor air compressor harbor freight
Error:获取session失败,
Lubrication Style: | Lubricated |
---|---|
Cooling System: | Water Cooling |
Cylinder Position: | Vertical |
Structure Type: | Closed Type |
Installation Type: | Stationary Type |
Type: | Twin-Screw Compressor |
Customization: |
Available
|
|
---|
How to Repair and Maintain an Air Compressor
A compressor is a device used to move air from one place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.
Positive displacement
Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are two types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the two types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
oil free
If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in one minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
double acting
A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
fuel tank pressure switch
You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.
energy source
The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require three separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require three separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.
editor by CX 2023-04-11
China 110kw 150HP Air Cooling Industrial Pm VSD Two Stage Screw Air Compressor with Energy Saving 40% air compressor for sale
Product Description
110KW 150HP Air Cooling Industrial PM VSD Two Stage Screw Air Compressor with Power Conserving 40%
Specification:
Intelligent Screw Air Compressor
Ariend with substantial air circulation,minimal nose ,large relisbility.
The life of the spare elements is prolonged,simple to get ,missing expense .
Easy maintenanance,save more time.
Item Attributes
Vitality Saving
Ultra-low frequency speed manage technology significantly surpasses standard VSD compressor systems.
Able reduce than 15Hz operation,this program is truly capable of consistent variable pressure operation and considerable power preserving.
High Reliability
USoft-Start attribute makes it possible for for litte or no impact on the power provide technique and marginalises mechancial dress in and tear up on start off-up.
LLeakageis constantly present in any air program .at complete presure a very good program can unfastened .2Mpa.CZPT VSD machines can minimize thar decline by up to twenty five%just by providing the air pressure that is needed.
MUTE ENVIRONMENTAL Security
Advanceed Vector variable frequency manage minimizes vibration and sounds.The device can be used without having the prerequisite for a special room.
This means conserving of all sources necessary to put in a equipment in an external spot this kind of as pipe and energy lines and land.Oil exhaust output is decrease than 3ppm as a result negating enviromantal effect.
Strength Conserving 30%&More time Existence
Utilising frequency manage for the cooling supporter and travel motor makes it possible for for up to 30% power savings.This interprets into significantly less regular servicing of the screw compressor therefore even more important saving are attained over the daily life of the machine.
Our Exhibition
For Much more Products
Why Trust Us ?
Who We Are ?
ZHangZhoug Zhilun Mechanical &Electrical Co.Ltd. is 1 of the major manufactures,specialized in R & D, manufacturing and sales of the piston air compressor and screw air compressor. Our business is positioned in CZPT city, LuQiao District, TaiZhou Metropolis, only 3km away from TaiZhou Airport, and around 220km absent from HangZhou port. The traffic is extremely hassle-free for your going to.
Our business owns an spot of 50000 suqare mater and has more than 300 staffs.
We have sophisticated generation equipments and are common with the process of the mass generation. We also have higher precision measuring devices and high efficiency of automated assembly line to make sure the good quality and quantity of the merchandise. We have robust technological toughness and generation management, accumulating the technological staff and manamement crew from the leading air compressor enterprises. We set up our very own advancement staff, which has a sturdy capacity to produce the item and can satisfy the various needs from various client and makets.
We get the maket needs as the direction, strives for the survival by quality ,strives for the growth by innovation,always put clients,good quality and innovation in the initial spot ,comply with up the prefessional management and continuously fulfill the demanded of the customer. We constantly follow up the theory of folks-oriented, reputable organization, CZPT & reputable, concentrate on the industy of the air compressor, with the hard work to develop a very first-course model in the industry of air compressor.
Frequency Requested Query:
Q1: Are you manufacturing facility or trade company?
A1: We are factory.Thank you.
Q2: What’s the specific handle of your manufacturing facility?
A2: Our organization positioned in CZPT city,LuQiao District, TaiZhou, ZHangZhoug Province, China . Thank you.
Q3: Warranty terms of your air compressor equipment?
A3: One years warranty for the equipment and specialized assistance according to your wants.
This fall: Will you provide some spare areas of the air compressor?
A4: Yes, of system.
Q5: How long will you take to organize generation?
A5: About twenty five working days right after obtaining the deposit.
Q6: Can you acknowledge OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcomed.
Q7:What trade phrases do we give ?
A7:Trade terms FOB, CIF.
Q8:What is our payment time period? What sort of settlement currency do we offer you ?
A8:Typically, we can do T/T and LC at sight, for the T/T, 30% will be essential as deposit, the harmony volume towards the duplicate of the BL.
We can acknowledge the currency in USD or RMB.
Q9:What about the price of sample?
A9: The price of the sample will be essential, but we can return back the amount in the future purchase by 1*40’HQ.
US $10,000-15,000 / Piece | |
1 Piece (Min. Order) |
###
After-sales Service: | Online Support |
---|---|
Warranty: | 12 Months |
Lubrication Style: | Lubricated |
Cooling System: | Air Cooling |
Power Source: | AC Power |
Cylinder Position: | Vertical |
###
Samples: |
US$ 15000/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
US $10,000-15,000 / Piece | |
1 Piece (Min. Order) |
###
After-sales Service: | Online Support |
---|---|
Warranty: | 12 Months |
Lubrication Style: | Lubricated |
Cooling System: | Air Cooling |
Power Source: | AC Power |
Cylinder Position: | Vertical |
###
Samples: |
US$ 15000/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
Choosing an Air Compressor
Considering a new Air Compressor? Here are some tips to make the decision easier. Learn the pros and cons of each type, including the differences between oil-injected and oil-free models, single stage and positive displacement. In addition, learn more about the different technologies that are available for your air compressor. It is important to choose an appropriate unit for the type of work you do. Here are some of the best compressors available today.
Positive displacement
There are several different types of air compressors, but most are positive displacement air compressors. They use a rotary or reciprocating component to compress air. The reciprocating component compresses air by reducing the volume of the chamber. Positive displacement compressors are used in bicycle pumps, chemical plants, and refrigerators. Positive displacement air compressors use multiple inlet ports. Despite the various types, the principle of operation remains the same.
Another type of positive displacement air compressor is a reciprocating piston. The piston inside a cylinder moves up and down, causing the compressed air to fill the upper part of the cylinder. These air compressors are used in a variety of different applications, including blowing bottles and gas pipelines. These air compressors can be water-cooled, lubricated, or non-lubricated. Different types have different capacities and air pressures.
A positive displacement flowmeter uses a rotating chamber that divides continuous fluid into discrete portions. The number of times the chamber is filled and discharged can be used to estimate the flow rate. The rotation speed of the measuring chamber is directly proportional to the flow rate. The drawbacks of this type of positive displacement flowmeter are that it is prone to jamming. If the fluid contains particles, it may be too thick for the meter to determine flow rate.
A negative displacement air compressor was invented in 1860 and is the oldest type of compressor. It uses two lobes positioned in a circular cavity. One rotor is connected to an engine, while the other pushes the other one to spin in the opposite direction. Negative displacement compressors are low-maintenance, but they do require more precision. They are often used in nuclear power plants because they use the kinetic energy of the rotating elements to produce pressure.
Oil-injected
Oil-flooded or oil-injected air compressors use liquid to seal and lubricate moving parts and reduce noise. Oil-flooded air compressors are effective for a variety of pneumatic tools and accessories. Some models have a thermostat that controls the amount of oil used during operation. Other types of oil-flooded air compressors are piston-type models. Here is an overview of the basic differences between these two air compressors.
An oil-injected air compressor is more expensive than a comparable oil-free air compressor, but its advantages far outweigh its disadvantages. An oil-free compressor is quieter, requires less maintenance, and has a lower price tag. It also offers a greater degree of air purity. A number of other advantages may also make this type of air compressor the better choice for many industrial settings. If you need a high-pressure compressor in a tight space, consider the benefits of an oil-free system.
Oil-injected air compressors require more maintenance than oil-free models. Both types of air compressors offer similar capacity and ISO 8573-1 Class 0 and 1-2 purity, but the oil-injected systems require more air-treatment components. They require an activated carbon filter and coalescing filter. Oil-injected air compressors will likely remain the standard for industrial air compressors for many years. And since their performance and efficiency are comparable, it may be worthwhile to invest in some point-of-use air treatment.
Both types of air compressors have their benefits. However, choosing between oil-free and oil-injected air compressors is not as straightforward as you might think. Whichever type you choose, make sure it will meet your needs. The benefits of an oil-injected air compressor outweigh their disadvantages. In general, oil-injected air compressors are more durable and can last longer than oil-free models. The only downside is their higher price.
Oil-free
When choosing an air compressor for your company, you’ll need to determine what it is going to be used for. For example, if you’re planning on using it to power multiple workers, you should consider getting an oil-free compressor. An oil-free compressor, on the other hand, is quieter and can power several workers at a time. If you’re a contractor, the most important consideration will be the type of jobs you’ll be doing. Higher air pressure means greater demand for air flow, and more pressure can damage the equipment.
Oil-free compressed air is certified 100% free of contaminants. Technically, oil-free air is not completely free of foreign matter, but it is extremely low within the limits of practical air quality. A technically oil-free air compressor might have a total oil level of 0.003 mg/m3. If you’re in need of a technically oil-free air compressor, you must install an air treatment equipment after your current compressor.
If you’re in the manufacturing industry, a good oil-free air compressor will save you money and reduce your environmental impact. Many of these tools require air compressors to work, and this equipment will ensure that they don’t get contaminated. To buy the best oil-free compressor, you should learn a bit about the different terms used by compressor repair companies. ACFM, for example, is the amount of air that can be compressed in one minute at rated conditions.
When you’re using an oil-free air compressor, you should know that the overall life of the device will be much shorter. Compared to an oil-flooded rotary screw air compressor, an oil-free compressor typically has a lifespan of 50 thousand hours. But it’s important to understand that this type of compressor can still cause damage to piping and processes. Therefore, you should choose an oil-free compressor when you need to clean air for your business.
Single-stage
A single-stage air compressor, also known as a piston air compressor, compresses air only once before storing it in a cylinder. This stored air has enough energy to power a variety of pneumatic tools, such as screwdrivers, chisels, and wrenches. These units are also ideally suited for low-flow applications and are widely used in gas stations, auto shops, and various manufacturing plants.
A single-stage air compressor uses two valves – one for inlet and one for outlet – to transfer compressed air. Both valves are actuated by springs. The inlet valve has a slight curvature to provide protection from damage. The compressor’s outlet valve opens when the pressure in the cylinder is higher than the pressure in the storage tank. The piston moves very quickly inside the cylinder, exerting a high amount of force throughout the compression process. This high piston speed is a common cause of compressor wear and tear.
A single-stage air compressor is ideal for smaller tradesmen and small construction crews. Its lightweight and compact design make it easier to transport and store. While it may be tempting to buy the first cheap air compressor you see, it’s important to balance the price against performance to choose the right air compressor for your needs. The best single-stage air compressor is one that provides excellent performance and durability. Its two-stage counterpart is designed for larger construction teams and large applications.
The main difference between a single-stage and a two-stage air compressor lies in their capacity. A single-stage air compressor compresses air only once and delivers it into the storage tank, while a two-stage compressor compresses it twice, creating double the pressure. Because of this, single-stage air compressors are cheaper and versatile than their counterparts, which means that they can be used for multiple purposes.
Low-noise
A low-noise air compressor is a type of industrial compressor that is less noisy than regular air compressors. These are generally smaller machines designed for smaller factories and workshops with a few to several employees. They are designed to handle mid-weight volumes of compressed air per day. This type of compressor is especially useful for smaller manufacturing businesses that need to produce compressed air for medical applications. Small breweries can also benefit from the low-noise capabilities of these compressors.
Low-noise air compressors come in various sizes and features. For smaller jobs, you can purchase a one-gallon model that is lightweight and portable. For larger jobs, you can purchase one with a larger tank that can provide more pressure for longer jobs. However, a larger tank will make the compressor heavier and harder to transport. To avoid this, make sure to check the size of the tank and how much power it can handle.
Considering a low-noise air compressor for your business? If so, you’ve come to the right place. There are a variety of affordable and dependable low-noise options to choose from. A CAT 10020C, for example, is designed to provide high-volume air to many outlets at once. A CAT 10020C comes with a 10-gallon tank, wheels, and a carrying handle.
Noise levels can also affect the productivity of employees. When employees work with air compressors in close proximity to each other, they may develop tinnitus. If employees are free from tinnitus because of the loud noise, they are likely to work more efficiently. Moreover, it will be easier for them to focus and communicate efficiently. If you need a compressor, a low-noise one is an excellent choice.
editor by czh 2023-01-14
China Low Noise Zw-0.6/2-25 Air Cooling Oil-Free Compressor Helium Ammonia Natural Gas Piston Compressor air compressor lowes
Product Description
HangZhou CZPT Gasoline Gear Co.,Ltd, exporting diaphragm compressor, piston compressor, oxygen generator, gasoline cylinder and nitrogen turbines with great good quality and low cost.
Piston compressor is a type of piston reciprocating movement to make gasoline pressurization and fuel shipping compressor largely is made up of functioning chamber, transmission areas, physique and auxiliary areas. The operating chamber is right utilised to compress the fuel, the piston is pushed by the piston rod in the cylinder for reciprocating motion, the volume of the doing work chamber on the two sides of the piston changes in change, the volume decreases on 1 side of the gas owing to the pressure boost by way of the valve discharge, the quantity will increase on 1 facet thanks to the reduction of air force by way of the valve to take up the fuel.
US $5,800-42,900 / set | |
1 set (Min. Order) |
###
After-sales Service: | 18 Months |
---|---|
Warranty: | 18 Months |
Lubrication Style: | Lubricated |
Cooling System: | Water Cooling |
Cylinder Arrangement: | Balanced Opposed Arrangement |
Cylinder Position: | Angular |
###
Customization: |
Available
|
---|
US $5,800-42,900 / set | |
1 set (Min. Order) |
###
After-sales Service: | 18 Months |
---|---|
Warranty: | 18 Months |
Lubrication Style: | Lubricated |
Cooling System: | Water Cooling |
Cylinder Arrangement: | Balanced Opposed Arrangement |
Cylinder Position: | Angular |
###
Customization: |
Available
|
---|
How to Choose the Right Air Compressor
An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
Electric motor
While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
Oil bath
Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.
Start/stop control
An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
Variable speed drive
A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.
editor by czh 2022-12-08